New 60-90 Extra 260
#1
Thread Starter
My Feedback: (4)
New 60-90 Extra 260
Aeroworks is proud to add too their line of QUICK BUILD Series Aircraft
Designed with the customer in mind to provide the highest quality, light weight construction and fastest build time possible.
Aeroworks has Raised the Bar. The QB Series is top quality in both design and performance that has set a new standard for ARF aircraft
Aeroworks is proud to introduce the .60-.90 Extra 260 QB (Quick Build), this airplane is sure to impress with its outstanding power to weight ratio, unbeatable durability and ease of assembly. Aeroworks .60-.90 Extra 260 is sure to be the highest quality airplane you will ever build or fly. The .60-.90 Extra 260 was designed with the aspiring sport or 3D pilot in mind and features a light wing loading and large control surfaces for extreme maneuverability, yet easy handling is just a rate switch away.
The Extra 260 QB has been designed to accommodate both glow and electric power systems. All mounting hardware including engine mount has been included for your choice of glow engine. Pre-formed air inlet scoops and pre-cut air exit slots provided for electric power conversions.
SPECIFICATIONS
Wing span 60 inches.
Wing Area 690 sq. in.
Fuselage length 55" (Rudder to front of spinner)
Weight 6 to 6.5 lbs
Engine .60 - .90 Glow
Electric Power
Radio 6 Channels minimum
FEATURING
Glow or Electric Ready
Strong Light Weight Construction
Complete and Detailed Instruction Manual
Painted and Pre mounted 7075 Aluminum Landing gear
Pre mounted Tail Wheel Assembly
Complete US Standard Hardware Package Included
Two piece removable wings
Carbon FiberWing Tube
Professionally covered in ULTRACOTEâ„¢
Additional UTRACOTEâ„¢ supplied for small patches and repairs
Pre-Hinged from factory
One Servo per Wing panel
One Servo per Elevator Half
Large control surfaces double beveled for maximum throw
Pre Mounted Fiberglass Cowl and Wheel Pants
Pre Mounted and Tinted Canopy / Hatch assembly
Pre installed and fuel proofed engine box
Laser marked engine mounting templates
Custom Deflection Rudder Gage
Custom Throw Meter
Custom Vinyl Decal Set
8 to 10 Hours assembly Time
Expeceted dilevery date November 2008, pre order today at Aero-works.net
Designed with the customer in mind to provide the highest quality, light weight construction and fastest build time possible.
Aeroworks has Raised the Bar. The QB Series is top quality in both design and performance that has set a new standard for ARF aircraft
Aeroworks is proud to introduce the .60-.90 Extra 260 QB (Quick Build), this airplane is sure to impress with its outstanding power to weight ratio, unbeatable durability and ease of assembly. Aeroworks .60-.90 Extra 260 is sure to be the highest quality airplane you will ever build or fly. The .60-.90 Extra 260 was designed with the aspiring sport or 3D pilot in mind and features a light wing loading and large control surfaces for extreme maneuverability, yet easy handling is just a rate switch away.
The Extra 260 QB has been designed to accommodate both glow and electric power systems. All mounting hardware including engine mount has been included for your choice of glow engine. Pre-formed air inlet scoops and pre-cut air exit slots provided for electric power conversions.
SPECIFICATIONS
Wing span 60 inches.
Wing Area 690 sq. in.
Fuselage length 55" (Rudder to front of spinner)
Weight 6 to 6.5 lbs
Engine .60 - .90 Glow
Electric Power
Radio 6 Channels minimum
FEATURING
Glow or Electric Ready
Strong Light Weight Construction
Complete and Detailed Instruction Manual
Painted and Pre mounted 7075 Aluminum Landing gear
Pre mounted Tail Wheel Assembly
Complete US Standard Hardware Package Included
Two piece removable wings
Carbon FiberWing Tube
Professionally covered in ULTRACOTEâ„¢
Additional UTRACOTEâ„¢ supplied for small patches and repairs
Pre-Hinged from factory
One Servo per Wing panel
One Servo per Elevator Half
Large control surfaces double beveled for maximum throw
Pre Mounted Fiberglass Cowl and Wheel Pants
Pre Mounted and Tinted Canopy / Hatch assembly
Pre installed and fuel proofed engine box
Laser marked engine mounting templates
Custom Deflection Rudder Gage
Custom Throw Meter
Custom Vinyl Decal Set
8 to 10 Hours assembly Time
Expeceted dilevery date November 2008, pre order today at Aero-works.net
#6
Thread Starter
My Feedback: (4)
RE: New 60-90 Extra 260
ORIGINAL: kbailey45
Curious on the Saito .82 here as well.
Curious on the Saito .82 here as well.
Also, these are in stock and shipping, Rocco and I went through one of these today and we were both very impressed with how this little plane turned out. If you havent told Santa what you want for Christmas this would definatley be on the top of my list!
#7
Join Date: Jan 2007
Location: Hollywood,
FL
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
RE: New 60-90 Extra 260
Hello Mark, I am interested in the extra 260 50cc, but have a question. You recommend a 180 lb rated servo on all surfaces. Can I be safe in the 160 range for sport flying; I don't am not interested in 3d flying. I am also interested in the 35cc extra 300 and would like to know the best target weight for the engine. I spoke to Chuck yesterday and he suggested I pass engine size question by you. He also cautioned about servos with less than the recommended torque. Thanks in advance. I have an Aeroworks 61 size edge and love the quality and performance, and I am looking to move up.
#8
My Feedback: (26)
RE: New 60-90 Extra 260
Hi Mark,
I see that these are now in stock so I'm ordering the Extra 260 .60-.90 size QB today and have a YS 110-S laying around to put on it. Will the width of it fit inside the cowl if I invert it? I understand if inverted the bottom will a touch. I plan to fly IMAC and sport flying.
Thanks,
Frank
I see that these are now in stock so I'm ordering the Extra 260 .60-.90 size QB today and have a YS 110-S laying around to put on it. Will the width of it fit inside the cowl if I invert it? I understand if inverted the bottom will a touch. I plan to fly IMAC and sport flying.
Thanks,
Frank
#9
Thread Starter
My Feedback: (4)
RE: New 60-90 Extra 260
ORIGINAL: Aero-Nut
Hi Mark,
I see that these are now in stock so I'm ordering the Extra 260 .60-.90 size QB today and have a YS 110-S laying around to put on it. Will the width of it fit inside the cowl if I invert it? I understand if inverted the bottom will a touch. I plan to fly IMAC and sport flying.
Thanks,
Frank
Hi Mark,
I see that these are now in stock so I'm ordering the Extra 260 .60-.90 size QB today and have a YS 110-S laying around to put on it. Will the width of it fit inside the cowl if I invert it? I understand if inverted the bottom will a touch. I plan to fly IMAC and sport flying.
Thanks,
Frank
Frank,
The motor will pass through the bottom of the cowl if mounted fully inverted. The manual shows the engine being mounted at an inverted 45*, this keeps as much of the engine inside of the cowl and will keep the muffler in the center of the plane.
#11
Member
Join Date: Feb 2008
Location: Co. Offaly, IRELAND
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
RE: New 60-90 Extra 260
Hi Mark,
It mas mentioned earlier about how saito's new FG 20cc gas engine would work in this plane. That's what I would like to put in.
Thanks Mark
It mas mentioned earlier about how saito's new FG 20cc gas engine would work in this plane. That's what I would like to put in.
Thanks Mark
#12
Thread Starter
My Feedback: (4)
RE: New 60-90 Extra 260
ORIGINAL: dmurf
Hi Mark,
It mas mentioned earlier about how saito's new FG 20cc gas engine would work in this plane. That's what I would like to put in.
Thanks Mark
Hi Mark,
It mas mentioned earlier about how saito's new FG 20cc gas engine would work in this plane. That's what I would like to put in.
Thanks Mark
The FG 20 will be heavy compared to the .60-1.15 glow motors that we recomend. If you are looking to get good 3D performance I would stick with the glow engine, if you want a good sport plane then the FG-20 will work.
#13
Member
Join Date: Oct 2008
Location: Kangiqsualujjuaq,
QC, CANADA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
RE: New 60-90 Extra 260
Hi Mark,
my question is about electric conversion. I already own a AXI 4130/16 motor, opto 77 and a 6cell 5000mah. Do you thing it's a good set up for that plane ? Which prop. should i use ?
Thank you
Pascal
my question is about electric conversion. I already own a AXI 4130/16 motor, opto 77 and a 6cell 5000mah. Do you thing it's a good set up for that plane ? Which prop. should i use ?
Thank you
Pascal
#17
My Feedback: (26)
RE: New 60-90 Extra 260
ORIGINAL: Mark Dennis
Aeroworks is proud to add too their line of QUICK BUILD Series Aircraft
Designed with the customer in mind to provide the highest quality, light weight construction and fastest build time possible.
Aeroworks has Raised the Bar. The QB Series is top quality in both design and performance that has set a new standard for ARF aircraft
Aeroworks is proud to introduce the .60-.90 Extra 260 QB (Quick Build), this airplane is sure to impress with its outstanding power to weight ratio, unbeatable durability and ease of assembly. Aeroworks .60-.90 Extra 260 is sure to be the highest quality airplane you will ever build or fly. The .60-.90 Extra 260 was designed with the aspiring sport or 3D pilot in mind and features a light wing loading and large control surfaces for extreme maneuverability, yet easy handling is just a rate switch away.
The Extra 260 QB has been designed to accommodate both glow and electric power systems. All mounting hardware including engine mount has been included for your choice of glow engine. Pre-formed air inlet scoops and pre-cut air exit slots provided for electric power conversions.
SPECIFICATIONS
Wing span 60 inches.
Wing Area 690 sq. in.
Fuselage length 55" (Rudder to front of spinner)
Weight 6 to 6.5 lbs
Engine .60 - .90 Glow
Electric Power
Radio 6 Channels minimum
FEATURING
Glow or Electric Ready
Strong Light Weight Construction
Complete and Detailed Instruction Manual
Painted and Pre mounted 7075 Aluminum Landing gear
Pre mounted Tail Wheel Assembly
Complete US Standard Hardware Package Included
Two piece removable wings
Carbon FiberWing Tube
Professionally covered in ULTRACOTEâ„¢
Additional UTRACOTEâ„¢ supplied for small patches and repairs
Pre-Hinged from factory
One Servo per Wing panel
One Servo per Elevator Half
Large control surfaces double beveled for maximum throw
Pre Mounted Fiberglass Cowl and Wheel Pants
Pre Mounted and Tinted Canopy / Hatch assembly
Pre installed and fuel proofed engine box
Laser marked engine mounting templates
Custom Deflection Rudder Gage
Custom Throw Meter
Custom Vinyl Decal Set
8 to 10 Hours assembly Time
Expeceted dilevery date November 2008, pre order today at Aero-works.net
Aeroworks is proud to add too their line of QUICK BUILD Series Aircraft
Designed with the customer in mind to provide the highest quality, light weight construction and fastest build time possible.
Aeroworks has Raised the Bar. The QB Series is top quality in both design and performance that has set a new standard for ARF aircraft
Aeroworks is proud to introduce the .60-.90 Extra 260 QB (Quick Build), this airplane is sure to impress with its outstanding power to weight ratio, unbeatable durability and ease of assembly. Aeroworks .60-.90 Extra 260 is sure to be the highest quality airplane you will ever build or fly. The .60-.90 Extra 260 was designed with the aspiring sport or 3D pilot in mind and features a light wing loading and large control surfaces for extreme maneuverability, yet easy handling is just a rate switch away.
The Extra 260 QB has been designed to accommodate both glow and electric power systems. All mounting hardware including engine mount has been included for your choice of glow engine. Pre-formed air inlet scoops and pre-cut air exit slots provided for electric power conversions.
SPECIFICATIONS
Wing span 60 inches.
Wing Area 690 sq. in.
Fuselage length 55" (Rudder to front of spinner)
Weight 6 to 6.5 lbs
Engine .60 - .90 Glow
Electric Power
Radio 6 Channels minimum
FEATURING
Glow or Electric Ready
Strong Light Weight Construction
Complete and Detailed Instruction Manual
Painted and Pre mounted 7075 Aluminum Landing gear
Pre mounted Tail Wheel Assembly
Complete US Standard Hardware Package Included
Two piece removable wings
Carbon FiberWing Tube
Professionally covered in ULTRACOTEâ„¢
Additional UTRACOTEâ„¢ supplied for small patches and repairs
Pre-Hinged from factory
One Servo per Wing panel
One Servo per Elevator Half
Large control surfaces double beveled for maximum throw
Pre Mounted Fiberglass Cowl and Wheel Pants
Pre Mounted and Tinted Canopy / Hatch assembly
Pre installed and fuel proofed engine box
Laser marked engine mounting templates
Custom Deflection Rudder Gage
Custom Throw Meter
Custom Vinyl Decal Set
8 to 10 Hours assembly Time
Expeceted dilevery date November 2008, pre order today at Aero-works.net
Frank
#18
My Feedback: (7)
Join Date: May 2005
Location: San Jose,
CA
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
RE: New 60-90 Extra 260
ORIGINAL: Aero-Nut
Just received mine and there is nothing prehinged, or pre-mounted. Your email says different. I have received planes that were completely prehinged(Glued). Did I get a lemon?
Frank
Just received mine and there is nothing prehinged, or pre-mounted. Your email says different. I have received planes that were completely prehinged(Glued). Did I get a lemon?
Frank
#20
My Feedback: (7)
Join Date: May 2005
Location: San Jose,
CA
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
RE: New 60-90 Extra 260
ORIGINAL: [email protected]
Hi Frank []
Please, keep us in touch with your issue. How look the quality of the plane ?
thanks
Pascal
Hi Frank []
Please, keep us in touch with your issue. How look the quality of the plane ?
thanks
Pascal
#23
My Feedback: (50)
Join Date: Jul 2004
Location: lenoir,
NC
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
RE: New 60-90 Extra 260
You guys are so spoiled. I read somewhere that the hinges would not be glued and the gear not mounted. I think it was on there web site. I would rather glue my own ca hinges any way.
#24
My Feedback: (26)
RE: New 60-90 Extra 260
Yeah, aren't we all a little spoiled. I travel quite a bit so my time is limited so QB is about the only way for me these days but that's not the point. The point is I would have bought the Edge for $170 vs the Extra @ $275...it's the same wing span as the Edge for crying out load and $105 more....!!! That's a large difference for about the same bird in anybody's book.
Oh well......Everyone have a great Christmas.
Oh well......Everyone have a great Christmas.
#25
Member
Join Date: Oct 2008
Location: Kangiqsualujjuaq,
QC, CANADA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
RE: New 60-90 Extra 260
Hi Aero-nut !
If you have a chance to weight your plane before you put your motor on... i will really appreciate !!! I want make a electric conversion and that could help me a lot if i could know the weight "raw". So i could figure my total weight with my motor and batterie.
Thank you and have a MERRY CHRISTMAS !!!!
Pascal
If you have a chance to weight your plane before you put your motor on... i will really appreciate !!! I want make a electric conversion and that could help me a lot if i could know the weight "raw". So i could figure my total weight with my motor and batterie.
Thank you and have a MERRY CHRISTMAS !!!!
Pascal