Just Wondering? New DLE-55 In the new 50cc Edge???
#1
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Jul 2005
Location: Charleston,
TN
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Just Wondering? New DLE-55 In the new 50cc Edge???
Any thoughts on using the DLE-55 in the new edge?? I am wanting good pull out of hover. I am wanting to try to keep it light also. Looking at maybe Getting carbon landing gear and wing tubes also. But it is really a hard choice though??? I am a huge Edge fan!!! But all the other new 50cc planes aero works has now are awesome!!!! Thanks for any help!!!!
#2
Senior Member
My Feedback: (5)
Join Date: Dec 2008
Location: mcallen, TX
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
i think you need to wait some poeple to make maiden with the Edge, i was on the way to order one but i couldnt wait more time to get a gasser, so i got the Extra 300. I have the DLE55 and i can tell it really can go out of hover very easy.
Regards,
Regards,
#3
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Jul 2005
Location: Charleston,
TN
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
Yea, I really like that edge! I guess I can wait for it..I need to sell some stuff first anyway!!! Just dont tell my wife!!!!!
#4
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Jul 2005
Location: Charleston,
TN
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
ORIGINAL: f5air
i think you need to wait some poeple to make maiden with the Edge, i was on the way to order one but i couldnt wait more time to get a gasser, so i got the Extra 300. I have the DLE55 and i can tell it really can go out of hover very easy.
Regards,
i think you need to wait some poeple to make maiden with the Edge, i was on the way to order one but i couldnt wait more time to get a gasser, so i got the Extra 300. I have the DLE55 and i can tell it really can go out of hover very easy.
Regards,
#5
Senior Member
My Feedback: (5)
Join Date: Dec 2008
Location: mcallen, TX
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
lol, np, i have the Edge 540 46-60 and i love it....the other problem with the new 50cc edge is that my rav4 was not big enough for it lol. Well my setup is:
- DLE55 with Xoar 22x8 for brake in and Hawk 22x10 now.
- MPI 3.5" spinner
- Fromeco 2600 mah for ignition with Smart fly Ingition Regulator
- Fromeco 5200 mah for RX with Sahara Regulator
- Hitec 7985 for throttle
- Hitec 7955 for Ailerons, Elevators and Rudder
- SWB servo arms for surface 1.5", and just 3" for the rudder
- HD extension and switch
- Futaba 617 rx
- Futaba 7C radio
The 300 feels amazing with this setup, maybe the servos are a overkill but is better to get a great servos on this investment for future airplanes, TBM has exellent prices so i order almost all my electronics from them.
- DLE55 with Xoar 22x8 for brake in and Hawk 22x10 now.
- MPI 3.5" spinner
- Fromeco 2600 mah for ignition with Smart fly Ingition Regulator
- Fromeco 5200 mah for RX with Sahara Regulator
- Hitec 7985 for throttle
- Hitec 7955 for Ailerons, Elevators and Rudder
- SWB servo arms for surface 1.5", and just 3" for the rudder
- HD extension and switch
- Futaba 617 rx
- Futaba 7C radio
The 300 feels amazing with this setup, maybe the servos are a overkill but is better to get a great servos on this investment for future airplanes, TBM has exellent prices so i order almost all my electronics from them.
#6
My Feedback: (7)
Join Date: May 2005
Location: San Jose,
CA
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
ORIGINAL: rmillerawacs
Any thoughts on using the DLE-55 in the new edge?? I am wanting good pull out of hover. I am wanting to try to keep it light also. Looking at maybe Getting carbon landing gear and wing tubes also. But it is really a hard choice though??? I am a huge Edge fan!!! But all the other new 50cc planes aero works has now are awesome!!!! Thanks for any help!!!!
Any thoughts on using the DLE-55 in the new edge?? I am wanting good pull out of hover. I am wanting to try to keep it light also. Looking at maybe Getting carbon landing gear and wing tubes also. But it is really a hard choice though??? I am a huge Edge fan!!! But all the other new 50cc planes aero works has now are awesome!!!! Thanks for any help!!!!
#7
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Jul 2005
Location: Charleston,
TN
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
Thanks for the great info!! I think i will try to pick up a DLE-55 first, and then figure out what palne to stick it in... To many choices, I still like the aeroworks edge and the new extra 300 is a really close 2nd!!! thanks!!!
#8
My Feedback: (6)
Join Date: Jun 2005
Location: Thornton,
CO
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
ORIGINAL: rmillerawacs
Thanks for the great info!! I think i will try to pick up a DLE-55 first, and then figure out what palne to stick it in... To many choices, I still like the aeroworks edge and the new extra 300 is a really close 2nd!!! thanks!!!
Thanks for the great info!! I think i will try to pick up a DLE-55 first, and then figure out what palne to stick it in... To many choices, I still like the aeroworks edge and the new extra 300 is a really close 2nd!!! thanks!!!
I think you would be happy with either. The Edges are very cool with the racing schemes.
Get both!
Cory
#9
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Jul 2005
Location: Charleston,
TN
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
That would be nice!!!! Right now I do not have a way to transport the 50cc size plane. I got a trailer hitch for my car and light 12ft trailer. Now I am drawing up some ideas to close it in. My plans are to try to keep the trailer light and design it to have a low profile. And have it set up to hold atleast one 100cc size and a few other small planes. Now I am just trying to figure out what to use for the sides and roof????
#10
Join Date: Dec 2005
Location: Olympia,
WA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
rmillerawacs,
[&:][&:][&:]Address sounds military? One My Planes is CMP EDGE 540T with DL-50 Engine. Using 22 X 10 or 23 X 10 Bambula Prop and It has Totally Unlimited Vertical. [sm=punching.gif][sm=omg_smile.gif][X(] We Threw away ALL the STOCK HARDWARE !!!! IT's Not Strong enough. CG in the Directions is WAY OFF and makes it Super Tail Heavy and MORE THAN HANDFULL TO FLY.[:@][:@][:@] We Moved CG and Now it's BLAST to FLY.[sm=shades_smile.gif][sm=shades_smile.gif] We Also Put 6061 Aluminium Custom Landing Gear and some 4.5" air Adjustable tires. But You can get One on SALE at AK Products For $299 Minus 15% right Now.[sm=idea.gif][sm=idea.gif][sm=idea.gif] If Decide to get one Write Me Since We Really Have That Plane Dialed in!!! Also it's Shorter and Might Fit Your Vehicle? [email protected] I enclosed Some Photos of some are DL Powered Gas Planes.[sm=75_75.gif][sm=75_75.gif][sm=75_75.gif] richgrow
[&:][&:][&:]Address sounds military? One My Planes is CMP EDGE 540T with DL-50 Engine. Using 22 X 10 or 23 X 10 Bambula Prop and It has Totally Unlimited Vertical. [sm=punching.gif][sm=omg_smile.gif][X(] We Threw away ALL the STOCK HARDWARE !!!! IT's Not Strong enough. CG in the Directions is WAY OFF and makes it Super Tail Heavy and MORE THAN HANDFULL TO FLY.[:@][:@][:@] We Moved CG and Now it's BLAST to FLY.[sm=shades_smile.gif][sm=shades_smile.gif] We Also Put 6061 Aluminium Custom Landing Gear and some 4.5" air Adjustable tires. But You can get One on SALE at AK Products For $299 Minus 15% right Now.[sm=idea.gif][sm=idea.gif][sm=idea.gif] If Decide to get one Write Me Since We Really Have That Plane Dialed in!!! Also it's Shorter and Might Fit Your Vehicle? [email protected] I enclosed Some Photos of some are DL Powered Gas Planes.[sm=75_75.gif][sm=75_75.gif][sm=75_75.gif] richgrow
#11
Senior Member
Thread Starter
My Feedback: (20)
Join Date: Jul 2005
Location: Charleston,
TN
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
Thanks fpr the info!!! I have looked at those planes also! I will have to go check it out again. And I was in the military from 99 - 05 I was a crew chief on the E-3 (AWACS). It was a 707 airframe the one with the big round radar on top of it! Wish I would have stayed in now.................
#12
Join Date: Dec 2005
Location: Olympia,
WA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
rmillerawacs,
[&:][&:][&:]You Should Check IF YOU CAN Still Get Back in the Services. [sm=50_50.gif][:-][sm=idea.gif] Maybe back in Air Force if let You OR look at ARMY Aviation or Navy Aviation. [sm=49_49.gif][sm=71_71.gif][sm=shades_smile.gif] Navy Pays Highest and You will Score High With Your Experience and Could get offered High Level Training.[sm=thumbs_up.gif][sm=teeth_smile.gif][sm=wink_smile.gif] Navy Has Sub Hunter Aircraft kind of like a AWAC. I Spent 23 Years in ARMY Aviation 1967 to 1990. The Years Went Super Fast.[X(][X(][X(] I Planned Stay 30+ Year but My Knees went when I was selected for E-9 and had Retire Early. Didn't get Stay and Pin it on>[&o][&o][&o] Higher Rank You Get usually the more Challenging Jobs You Get. Also have More Job Satisfisfaction to Me. It Might Take a Couple Tries but I'll Bet IF You Got a Honorable Discharge You Still can get back in. I went in from Day ONE Planning have Long Military Career!!! Until they Tell You it Time You Have to Retire???[sm=angry_smile.gif][sm=angry_smile.gif][sm=angry_smile.gif] Send Me a E-mail direct because this isn't really place to Talk Careers. [email protected] and I'll call and talk to You. [sm=idea.gif][sm=idea.gif][sm=idea.gif] I'm also Retired RE/MAX Buyer's Agent who sold 99% to Military and Hold National Record for Buyer's Agents. Talked with over 20,000 Military Families and Was Featured in a 2 and 1/2 Pages Series of articles in "Militaries Times" ALL 4 Services Issues.[:-][:-][:-] Not Typical Military Retiree. [&:][&:][&:] Really Need Look at Retirement Benefits.[sm=idea.gif][sm=idea.gif][sm=idea.gif] Talk Me I've been Retired from ARMY AVIATION for 19 Years Now!!! I've Been Crewchief and had 19 Years on Flight Status out 23 years.
[sm=50_50.gif][sm=50_50.gif][sm=50_50.gif] I'd talk to Me About the CMP ARF's. We've Built 3 different ones all with Same Modifications and Planes All Fly Super!!! [sm=thumbs_up.gif][sm=tongue_smile.gif][sm=wink_smile.gif] Look Closely at Katanas Landing Gear and Hardware We Use to Control All Surfaces. Get Dubros HD & Monster Links at 20% Off Sale at Tower Hobbies and Titanium Links from Tower Hobbies. [sm=punching.gif][sm=omg_smile.gif][sm=thumbup.gif] The MPI Aluminium Servo Arms come From Troybuilt Models. I've Bought two Purple Katana's and Plan Buy another Edge 540T this Winter to Build. We Have Giles 202 but couldn't find any Digital Photos. Covering and Airframes are Super Quality especially in Hot Sunsine!!! Don't Bubble or Get Loose!!!! [sm=tongue_smile.gif][sm=teeth_smile.gif][sm=spinnyeyes.gif] I'd buy a "Modified CMP" over a Aeroworks ARF or QB My Self. Aeroworks are Great Planes But Covering on CMP I like Better and Even after Modifying the CMP IT COSTS WAY LESS MONEY !!![X(][X(][X(] Also Look at "Rich Models" at AK Products. http://ak-models.com/mm5/merchant.mv...Model_GasPower BEST HARDWARE PACKAGE WE'VE EVER SEEN INCLUDED IN ARF and ALL CARBON FIBER TUBES AND LANDING GEAR!!! [sm=thumbup.gif][sm=tongue_smile.gif][sm=wink_smile.gif][sm=omg_smile.gif][sm=punching.gif] We've Built close 50 Planes in Last 3 Years between My Flying Partner Don and Me. We're Building Me a "Rich Model" 50CC YAK54 and Don building the "Rich Model" 100CC Extra 260 with Brand New DLE-111 for power. [sm=punching.gif][sm=punching.gif][sm=punching.gif] Yes Our Wives Think We Are Both Crazy Over this Hobby!?! [sm=bananahead.gif][sm=bananahead.gif][sm=bananahead.gif] But We Love Flying These Planes. [8D][sm=shades_smile.gif][sm=tongue_smile.gif][sm=thumbs_up.gif]I have 3 of DL-50 Engines and Don has one DL 50 Engine too. We have 13 Gas Engines Between Us and looking at planning to get some of NEW DLE 30's to try out and if like them get 3 to 6 of them in next year. We'll try one if like it like other DL & DLE's We have We want get up 6 them for using on 25% 3D Planes like My Magic Hand YAK54 I Love or My Goldberg 67" YAK54 since I Still have one of Each ARF's We haven't Built Yet.[sm=tongue_smile.gif][sm=tongue_smile.gif][sm=tongue_smile.gif] We Know how get Most Bang For Your Bucks!!! I'm always Surfing Internet for Sales like AK-Models 15% 0ff Sale going on Now. Tower's SUPER SAVERS CLUB E-mailed Me Up 20% Off $300 Order and No Shipping or Sales Tax. WOW !!! [&:]richgrow
[&:][&:][&:]You Should Check IF YOU CAN Still Get Back in the Services. [sm=50_50.gif][:-][sm=idea.gif] Maybe back in Air Force if let You OR look at ARMY Aviation or Navy Aviation. [sm=49_49.gif][sm=71_71.gif][sm=shades_smile.gif] Navy Pays Highest and You will Score High With Your Experience and Could get offered High Level Training.[sm=thumbs_up.gif][sm=teeth_smile.gif][sm=wink_smile.gif] Navy Has Sub Hunter Aircraft kind of like a AWAC. I Spent 23 Years in ARMY Aviation 1967 to 1990. The Years Went Super Fast.[X(][X(][X(] I Planned Stay 30+ Year but My Knees went when I was selected for E-9 and had Retire Early. Didn't get Stay and Pin it on>[&o][&o][&o] Higher Rank You Get usually the more Challenging Jobs You Get. Also have More Job Satisfisfaction to Me. It Might Take a Couple Tries but I'll Bet IF You Got a Honorable Discharge You Still can get back in. I went in from Day ONE Planning have Long Military Career!!! Until they Tell You it Time You Have to Retire???[sm=angry_smile.gif][sm=angry_smile.gif][sm=angry_smile.gif] Send Me a E-mail direct because this isn't really place to Talk Careers. [email protected] and I'll call and talk to You. [sm=idea.gif][sm=idea.gif][sm=idea.gif] I'm also Retired RE/MAX Buyer's Agent who sold 99% to Military and Hold National Record for Buyer's Agents. Talked with over 20,000 Military Families and Was Featured in a 2 and 1/2 Pages Series of articles in "Militaries Times" ALL 4 Services Issues.[:-][:-][:-] Not Typical Military Retiree. [&:][&:][&:] Really Need Look at Retirement Benefits.[sm=idea.gif][sm=idea.gif][sm=idea.gif] Talk Me I've been Retired from ARMY AVIATION for 19 Years Now!!! I've Been Crewchief and had 19 Years on Flight Status out 23 years.
[sm=50_50.gif][sm=50_50.gif][sm=50_50.gif] I'd talk to Me About the CMP ARF's. We've Built 3 different ones all with Same Modifications and Planes All Fly Super!!! [sm=thumbs_up.gif][sm=tongue_smile.gif][sm=wink_smile.gif] Look Closely at Katanas Landing Gear and Hardware We Use to Control All Surfaces. Get Dubros HD & Monster Links at 20% Off Sale at Tower Hobbies and Titanium Links from Tower Hobbies. [sm=punching.gif][sm=omg_smile.gif][sm=thumbup.gif] The MPI Aluminium Servo Arms come From Troybuilt Models. I've Bought two Purple Katana's and Plan Buy another Edge 540T this Winter to Build. We Have Giles 202 but couldn't find any Digital Photos. Covering and Airframes are Super Quality especially in Hot Sunsine!!! Don't Bubble or Get Loose!!!! [sm=tongue_smile.gif][sm=teeth_smile.gif][sm=spinnyeyes.gif] I'd buy a "Modified CMP" over a Aeroworks ARF or QB My Self. Aeroworks are Great Planes But Covering on CMP I like Better and Even after Modifying the CMP IT COSTS WAY LESS MONEY !!![X(][X(][X(] Also Look at "Rich Models" at AK Products. http://ak-models.com/mm5/merchant.mv...Model_GasPower BEST HARDWARE PACKAGE WE'VE EVER SEEN INCLUDED IN ARF and ALL CARBON FIBER TUBES AND LANDING GEAR!!! [sm=thumbup.gif][sm=tongue_smile.gif][sm=wink_smile.gif][sm=omg_smile.gif][sm=punching.gif] We've Built close 50 Planes in Last 3 Years between My Flying Partner Don and Me. We're Building Me a "Rich Model" 50CC YAK54 and Don building the "Rich Model" 100CC Extra 260 with Brand New DLE-111 for power. [sm=punching.gif][sm=punching.gif][sm=punching.gif] Yes Our Wives Think We Are Both Crazy Over this Hobby!?! [sm=bananahead.gif][sm=bananahead.gif][sm=bananahead.gif] But We Love Flying These Planes. [8D][sm=shades_smile.gif][sm=tongue_smile.gif][sm=thumbs_up.gif]I have 3 of DL-50 Engines and Don has one DL 50 Engine too. We have 13 Gas Engines Between Us and looking at planning to get some of NEW DLE 30's to try out and if like them get 3 to 6 of them in next year. We'll try one if like it like other DL & DLE's We have We want get up 6 them for using on 25% 3D Planes like My Magic Hand YAK54 I Love or My Goldberg 67" YAK54 since I Still have one of Each ARF's We haven't Built Yet.[sm=tongue_smile.gif][sm=tongue_smile.gif][sm=tongue_smile.gif] We Know how get Most Bang For Your Bucks!!! I'm always Surfing Internet for Sales like AK-Models 15% 0ff Sale going on Now. Tower's SUPER SAVERS CLUB E-mailed Me Up 20% Off $300 Order and No Shipping or Sales Tax. WOW !!! [&:]richgrow
#13
My Feedback: (6)
Join Date: Jun 2005
Location: Thornton,
CO
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
The DLE55 should be a great motor in the Edge. From I have seen, the 55 has seems to have more power than the DL50.
I have a DL50 and it runs great. I just completed a Extra 300 LP for a friend with a DLE55 and it started on the 4 flip, amazing!
My DL50 did not.
Can't wait to see some pictures.
Cory
I have a DL50 and it runs great. I just completed a Extra 300 LP for a friend with a DLE55 and it started on the 4 flip, amazing!
My DL50 did not.
Can't wait to see some pictures.
Cory
#14
Senior Member
My Feedback: (5)
Join Date: Dec 2008
Location: mcallen, TX
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
ORIGINAL: RC4X4
The DLE55 should be a great motor in the Edge. From I have seen, the 55 has seems to have more power than the DL50.
I have a DL50 and it runs great. I just completed a Extra 300 LP for a friend with a DLE55 and it started on the 4 flip, amazing!
My DL50 did not.
Can't wait to see some pictures.
Cory
The DLE55 should be a great motor in the Edge. From I have seen, the 55 has seems to have more power than the DL50.
I have a DL50 and it runs great. I just completed a Extra 300 LP for a friend with a DLE55 and it started on the 4 flip, amazing!
My DL50 did not.
Can't wait to see some pictures.
Cory
#16
Senior Member
Join Date: Aug 2006
Location: cannock, UNITED KINGDOM
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
RE: Just Wondering? New DLE-55 In the new 50cc Edge???
could anyone tell me what this other wire is for next to the pick up senser the red and black one is power but i dont no what the other wire is for any idears