Radio Help
#1
Junior Member
Thread Starter
My Feedback: (4)
Join Date: Dec 2010
Location: Barrington, NH
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Radio Help
Hello all i have an airtronics rd6000 and i have a bad circuit board. Im trying to remove the board but i cant seem to get the yellow wire holder off the circuit board. it is soldered on the back and it looks like it should just come off but i cant get it. I need to replace the board and i need to get this off to remove it.
This is the inside of the radio almost in the center there is a yellow wire harness with a bunch of white and 1 red wire that is what i am trying to remove.
http://static.rcgroups.net/forums/at...img_6727-3.jpg
Please help do i need to unsolder the back of it or is there a way to pry it off??
J
This is the inside of the radio almost in the center there is a yellow wire harness with a bunch of white and 1 red wire that is what i am trying to remove.
http://static.rcgroups.net/forums/at...img_6727-3.jpg
Please help do i need to unsolder the back of it or is there a way to pry it off??
J
#2
Junior Member
Join Date: Aug 2010
Location: Long Beach,
CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: Radio Help
It is soldered to the board. (It's not a connector plugged into a socket on the board.) Using some solder wick and/or a solder sucker would make it fairly easy to remove.
-Farrell
-Farrell