Dave172

My Feedback: (7)

I have the Airtronics RD 6000 sport transmitter. Every time I go full throttle my rudder also moves. What do I need to do to keep my rudder still while moving throttle up or down?

DRC1

My Feedback: (10)

Probably need more information...

If you carefully move the throttle to full power and back down slowly without moving the stick left or right does it still move the Rudder?

Are any mixes set up for Throttle to Rudder?

DRC1

My Feedback: (10)

Just noticed... Where at in Northern Kentucky?

Dave172

My Feedback: (7)

If I move the throttle slowly, up or down the rudder will move at the same rate. No mixing on throttle for rudder in the menu. Verona, KY

DRC1

My Feedback: (10)

Before doing anything else,Using Model Select - change to a different model on your transmitter (one not used) and try setting up the plane again.

Does the Rudder still move with Throttle input with a fresh set up??

Dave172

My Feedback: (7)

I have two planes set up on the RD 6000. I get the same rudder movement on both planes.

Dave172

My Feedback: (7)

Problem solved. I had the model stored in as HL 2 helio mode. I switched it to AR 1, problem solved. Thanks Larry.