old mercury bearings
#1

Thread Starter
Join Date: Jul 2009
Location: Medellin, COLOMBIA
Posts: 27

HI:
I need to change my Old mercury bearings, do you know the type of bearings do i have to buy? (number or serial or something).
thanks
Gonzalo
I need to change my Old mercury bearings, do you know the type of bearings do i have to buy? (number or serial or something).
thanks
Gonzalo
#2

My Feedback: (33)
Join Date: Oct 2010
Location: , OH
Posts: 1,729

who is going to do it for you?
If you can do it let me know I'll send one your way LOL
I tried takeing mine apart and relized ever one of these little tiny alen head bolts (12 of them I thing) were so locktighted they would rather brake than come out. I even tried hitting them with the torch for a while..
Good Luck
If you can do it let me know I'll send one your way LOL
I tried takeing mine apart and relized ever one of these little tiny alen head bolts (12 of them I thing) were so locktighted they would rather brake than come out. I even tried hitting them with the torch for a while..
Good Luck
#3

My Feedback: (4)
Join Date: Apr 2005
Location: Latrobe,
PA
Posts: 2,314

It should be the D608/602c bearings. BUT... there were some different versions from AMT USA. SO, take your engine apart first, and measure the bearings.
http://www.xicoy.com/catalog/product...products_id=57
http://www.xicoy.com/catalog/product...products_id=57
#4
Junior Member

Bearings needed for the old AMT Mercury are the 10X22X6 cageless hybride bearings being sold by the GRW distibutor, costs each 57,43 euro without VAT and posting.
The real old bearing contained a bearing brass inside ring but the new one's are without this bearing brass ring inside.
GRW no is D6900/603217.
http://www.grw.de/en/products/ball-b...-building.html
The real old bearing contained a bearing brass inside ring but the new one's are without this bearing brass ring inside.
GRW no is D6900/603217.
http://www.grw.de/en/products/ball-b...-building.html
Last edited by Ger Kovacs; 09-12-2015 at 08:09 AM.
«
Previous Thread
|
Next Thread
»