Pegasus HPES clutch
#1
Thread Starter
Pegasus HPES clutch
Hello all.
My Pegasus HPES has a problem with the clutch slipping(worn "O" ring?), so I have tried to remove the front cowl as per the instructions, but
it will not come off. Any suggestions?
Best regards, Frank.
My Pegasus HPES has a problem with the clutch slipping(worn "O" ring?), so I have tried to remove the front cowl as per the instructions, but
it will not come off. Any suggestions?
Best regards, Frank.
#3
Senior Member
My Feedback: (2)
Join Date: Jul 2002
Location: Fresno,
CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pegasus HPES clutch
Take a plastic or wooden dowl and a soft mallet and tap very lightly on the nose cowl to remove it. After a period of time, they become lodged in place. It is a very close tolerance, so be extremely careful! The same diligence applies to replacing the starter O-ring.
#4
Thread Starter
RE: Pegasus HPES clutch
Thank you for your response Mark.
When you say tap lightly with a "malet and plastic/wooden dowel", which part of the cowl do I target and in what direction?
It is proving to be quite a headache!
Thank you for your response, Frank.
When you say tap lightly with a "malet and plastic/wooden dowel", which part of the cowl do I target and in what direction?
It is proving to be quite a headache!
Thank you for your response, Frank.