which bearing could be fit to JetCentral SuperBee
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: hsin-chuTW, TAIWAN
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
which bearing could be fit to JetCentral SuperBee
Anybody knows which bearing could be fit to JetCentral SuperBee.
bearing specification, bearing maker, bearing type... any info will be helpful.
Thanks a lot.
bearing specification, bearing maker, bearing type... any info will be helpful.
Thanks a lot.
#2
My Feedback: (6)
Join Date: Aug 2002
Location: Citrus Heights ,
CA
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
RE: which bearing could be fit to JetCentral SuperBee
Take a look at Boca bearing site. They have a list of turbine manufacturers. here's the link.
http://www.bocabearings.com/main1.as...crossref&pg=10
From what i understood. Most brand of turbine uses the same size diameter bearings for specific
turbine thrust class. Either D608/602C or D688/602C
The smaller the turbine, the bearing size will be D688/602C. Typically ranging from 7lbs to 15lbs thrust
D608/602C for turbines 16lbs and up.
http://www.bocabearings.com/main1.as...crossref&pg=10
From what i understood. Most brand of turbine uses the same size diameter bearings for specific
turbine thrust class. Either D608/602C or D688/602C
The smaller the turbine, the bearing size will be D688/602C. Typically ranging from 7lbs to 15lbs thrust
D608/602C for turbines 16lbs and up.