GP Patty Wagstaff - Building & Flying
#4182
I bought this ARF in 2008; maidened about 2 months ago. ( It doesn't pay to rush these things). I am really pleased with the performance that the DA50 provides.
I can see this thread has got a little quiet lately, and I realize the product has been discontinued, but are there still flyers out there ?
I can see this thread has got a little quiet lately, and I realize the product has been discontinued, but are there still flyers out there ?
#4185
After a slow hit n miss start I'm back into getting my replacement Patty airframe up and ready for flying season. Bit of plugging and sanding motor box for the electric to Moki conversion.
Last edited by 401; 11-14-2015 at 04:21 AM.
#4188
Today I maidened the plane it is very precise, smooth with digital servos and my jeti tx. It almost lands by itself if you cut the throttle. I hadnt enough battery on my gopro but took a short pan of the plane on the ground.
https://www.youtube.com/watch?v=0JqX5rfP-mk
https://www.youtube.com/watch?v=0JqX5rfP-mk
Last edited by Fulcrum2111; 12-23-2015 at 03:24 PM.
#4192
Hope some are still flying this piece of history, thread has all but died. Here's a couple more pics of this very slow refurbishment. Poor old Patty sits shelved for the most part with other projects etc. Was hoping to have it flying this season but that's looking more and more unlikely. Here's to hoping anyway. Seasons greetings to all the Patty flyers out there.
Still in the market for a canopy and cowl if anyone can help. Cowl needs to be finished not a blank. Thanks
Still in the market for a canopy and cowl if anyone can help. Cowl needs to be finished not a blank. Thanks
Last edited by 401; 12-23-2016 at 01:17 AM.
#4194
Thanks, unfortunately with the $AUD to $US conversion atm plus shipping would make it unviable for me, then I would still need to paint and finish. I may be interested in tinted canopy only. Will pm for more info and pics of product pre-purchase.
#4197
A few short clips and a picture mine is going strong. I have installed a new carbon fiber painted fanding gear what do you thin about it?
http://www.youtube.com/watch?v=CtVlGUXYXEU
http://www.youtube.com/watch?v=pBRGUVYJkYw
Regards.
http://www.youtube.com/watch?v=CtVlGUXYXEU
http://www.youtube.com/watch?v=pBRGUVYJkYw
Regards.
Last edited by Fulcrum2111; 12-30-2016 at 02:42 PM.