flyrcplanes

I'm still putting mine together but I am using a Brison 2.4 gasser. Hitech high torque servos with 440 links and screw on ball links. So far assembly has been OK except that I hated having to glue the belly pan on. I had to make a one inch stand off for my engine to come out right in the cowl. Gorgeous bird. Looking forward to flying it. Will post after flight report.


Wayne Long
Slasham Valley Irregulars RC Club
Ashville, Alabama

frieshoo

My Feedback: (20)

I've almost finished mine. I'm using a sachs 3.2 with hitec 605/635 servos. 4-40 carbon rods from central hobbies. I didn't like the way the belly pan attached to the wing, and I don't like the 5mm bolts for the wing.

BAS

My Feedback: (28)

I changed the wing bolts to 1/4 20 nylon just took out the cheap blind nuts and drilled and tapped for 1/4 20 works good