NITRO PLANES TUCANO HELP
#1
Senior Member
Thread Starter
Join Date: Apr 2008
Location: wesley chapel,
FL
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
NITRO PLANES TUCANO HELP
Hi Guys,
I'm in need of some help here. I just got this Tucano from Nitro planes, the good news is I got the plane without any damage.
All parts are there, and it looks pretty good for the price. Here is the problem, the bulkheads are glue with what it looks like
hot glue. No big deal since the all came right off!!! I was going to re-glue them any way, but Im having a hard time getting this
glue out of the fuselage, it come off the formers really ease, but is glued very good to the fuse. Any ideas??
Thanks in advance,
Cheers,
Pisandro
I'm in need of some help here. I just got this Tucano from Nitro planes, the good news is I got the plane without any damage.
All parts are there, and it looks pretty good for the price. Here is the problem, the bulkheads are glue with what it looks like
hot glue. No big deal since the all came right off!!! I was going to re-glue them any way, but Im having a hard time getting this
glue out of the fuselage, it come off the formers really ease, but is glued very good to the fuse. Any ideas??
Thanks in advance,
Cheers,
Pisandro
#3
Senior Member
My Feedback: (5)
Join Date: Mar 2002
Location: Huntsville,
AL
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
RE: NITRO PLANES TUCANO HELP
Mine had partially loose formers, too. I dampened the loose joint areas and dribbled some white Gorilla Glue in places that were loose. Mine is the "Airshow" blue/yellow scheme and came retract-ready. I also found poorly glued mounts and used the G Glue there also. Both in the wing and nose mount beams. Otherwise it is made quite nicely.