New Tamiya On Road Kits!!!
08-19-2013, 10:17 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Yokohama, JAPAN
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
New Tamiya On Road Kits!!!
New Tamiya On Road Kits now at Banzai Hobby!!!
Volkswagen Beetle - M06
The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and the iconic car saw military service during the Second World War. The R/C model of this car was released in 1996 on the M-04 chassis. The 2013 model now sits on the modern and highly popular rear wheel drive M-06 chassis platform.
XB RTR Subaru XV (TT-02)
Released in 2012, the Subaru XV is a modern "crossover" vehicle that sees the body of the Impreza on a raised chassis designed for off-road driving.
Tamiya has faithfully reproduced this passenger car in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance
XB RTR Lancia Delta Integrale - (TT02)
The Lancia Delta Integrale, which has made a number of appearances on various Tamiya chassis platforms over the years, now makes its home on the entry level TT-02 chassis. The Lancia Delta Integrale was a legendary Rally warrior, as fans of the sport are sure to remember, as it won 6 titles back-to-back at the end of the 1980s and start of the 1990s. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performanc
XB RTR Mercedes-Benz SLS AMG
The SLS AMG GT3 is a racecar version of the September 2009-released Mercedes-Benz SLS AMG, and it is supplied to racing teams around the world. The aluminum long-nose, short-deck body is fitted with gull-wing doors and the functional interior features a roll cage. Down-force is provided by the front spoiler, large rear wing and rear diffuser, while the transaxle layout uses a sequential 6-speed transmission to transmit power from the front-mounted 6.2-liter V8 engine to the rear wheels.
Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.
Please check us out on Facebook for Weekly Updates and Specials!!!
Banzai Hobby Team
Volkswagen Beetle - M06
The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and the iconic car saw military service during the Second World War. The R/C model of this car was released in 1996 on the M-04 chassis. The 2013 model now sits on the modern and highly popular rear wheel drive M-06 chassis platform.
XB RTR Subaru XV (TT-02)
Released in 2012, the Subaru XV is a modern "crossover" vehicle that sees the body of the Impreza on a raised chassis designed for off-road driving.
Tamiya has faithfully reproduced this passenger car in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance
XB RTR Lancia Delta Integrale - (TT02)
The Lancia Delta Integrale, which has made a number of appearances on various Tamiya chassis platforms over the years, now makes its home on the entry level TT-02 chassis. The Lancia Delta Integrale was a legendary Rally warrior, as fans of the sport are sure to remember, as it won 6 titles back-to-back at the end of the 1980s and start of the 1990s. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performanc
XB RTR Mercedes-Benz SLS AMG
The SLS AMG GT3 is a racecar version of the September 2009-released Mercedes-Benz SLS AMG, and it is supplied to racing teams around the world. The aluminum long-nose, short-deck body is fitted with gull-wing doors and the functional interior features a roll cage. Down-force is provided by the front spoiler, large rear wing and rear diffuser, while the transaxle layout uses a sequential 6-speed transmission to transmit power from the front-mounted 6.2-liter V8 engine to the rear wheels.
Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.
Please check us out on Facebook for Weekly Updates and Specials!!!
Banzai Hobby Team
08-22-2013, 02:52 PM
#2
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Yokohama, JAPAN
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Tamiya XB RTR Off Road Kits
New Tamiya XB RTR Off Road Kits now at Banzai Hobby
RTR Holiday Buggy - DT02
This is a fully factory assembled and ready-to-run R/C model of the Holiday Buggy. The hard plastic body is mated to the easy to maintain DT-02 2WD off-road buggy platform. The Holiday Buggy features a 2WD rear wheel drive drive-train with full independent double wishbone suspension for easy off-road running. The pre-installed 2-channel radio gear system operates on 2.4Ghz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
RTR Sand Rover - DT02
This is a fully factory assembled and ready-to-run R/C model of the Sand Rover. The hard plastic body is mated to the easy to maintain DT-02 2WD off-road buggy platform. The Sand Rover features a 2WD rear wheel drive drive-train with full independent double wishbone suspension for easy off-road running. The pre-installed 2-channel radio gear system operates on 2.4Ghz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
TT02 Chassis - TT02 Factory Finished
This is a Factory Finished chassis of the new TT-02 4WD fully independent suspension on-road chassis. The chassis is factory assembled so all that is needed is a body set of your choice to complete. Choose among hundreds of sports car and touring car body sets to complete. This assembled item is ideal for beginner R/C enthusiasts who want the flexibility to add the 190mm touring car or sports car body of their choice.
Also From Tamiya a Few Accessories
Tamiya TRF Droop Gauge & TRF Droop Gauge Blocks
TSU-05 Digital Servo - Water Resistant
This water resistant digital servo has resistance to small amounts of water, protecting it from damage if the model moves through some standing water or suddenly encounters wet conditions. The servo features a gold colored heat-sink for increased durability.
Come an Check us out on Facebook for Weekly Specials an updates
Banzai Hobby Team
RTR Holiday Buggy - DT02
This is a fully factory assembled and ready-to-run R/C model of the Holiday Buggy. The hard plastic body is mated to the easy to maintain DT-02 2WD off-road buggy platform. The Holiday Buggy features a 2WD rear wheel drive drive-train with full independent double wishbone suspension for easy off-road running. The pre-installed 2-channel radio gear system operates on 2.4Ghz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
RTR Sand Rover - DT02
This is a fully factory assembled and ready-to-run R/C model of the Sand Rover. The hard plastic body is mated to the easy to maintain DT-02 2WD off-road buggy platform. The Sand Rover features a 2WD rear wheel drive drive-train with full independent double wishbone suspension for easy off-road running. The pre-installed 2-channel radio gear system operates on 2.4Ghz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
TT02 Chassis - TT02 Factory Finished
This is a Factory Finished chassis of the new TT-02 4WD fully independent suspension on-road chassis. The chassis is factory assembled so all that is needed is a body set of your choice to complete. Choose among hundreds of sports car and touring car body sets to complete. This assembled item is ideal for beginner R/C enthusiasts who want the flexibility to add the 190mm touring car or sports car body of their choice.
Also From Tamiya a Few Accessories
Tamiya TRF Droop Gauge & TRF Droop Gauge Blocks
TSU-05 Digital Servo - Water Resistant
This water resistant digital servo has resistance to small amounts of water, protecting it from damage if the model moves through some standing water or suddenly encounters wet conditions. The servo features a gold colored heat-sink for increased durability.
Come an Check us out on Facebook for Weekly Specials an updates
Banzai Hobby Team
08-22-2013, 04:20 PM
#3
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Yokohama, JAPAN
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
M05 PRO Chassis Kit - Gold Version
This is a limited edition version of the popular FWD drive, M-chassis M-05 platform. The plastic parts are molded in gold color, specifically the main chassis and damper stays for a unique look when combined with the standard black suspension parts. To finish off the special edition, extra aluminum parts are included which also feature a champagne gold color for added value and increased performance.
FF03 Chassis Kit - Carbon Double Deck
This limited edition release of the front-motor, front wheel drive FF-03 chassis has been tweaked further for ultimate Front-wheel-drive performance. The vertical frame has been removed from the newly-designed 2.5mm carbon frame, while a 2.0mm-thick upper deck has been added.
2.5mm Carbon Lower Deck 2.0mm Carbon Upper Deck 3.0mm Carbon Rear Damper Stay Aluminum Rear Bulkhead Aluminum Rear Upper Arm Mount Aluminum Front Damper Mount Aluminum Steering Mount
Get in Quick as these ARE Limited Edition Kits an wont last long
Banzai Hobby Team
This is a limited edition version of the popular FWD drive, M-chassis M-05 platform. The plastic parts are molded in gold color, specifically the main chassis and damper stays for a unique look when combined with the standard black suspension parts. To finish off the special edition, extra aluminum parts are included which also feature a champagne gold color for added value and increased performance.
FF03 Chassis Kit - Carbon Double Deck
This limited edition release of the front-motor, front wheel drive FF-03 chassis has been tweaked further for ultimate Front-wheel-drive performance. The vertical frame has been removed from the newly-designed 2.5mm carbon frame, while a 2.0mm-thick upper deck has been added.
2.5mm Carbon Lower Deck 2.0mm Carbon Upper Deck 3.0mm Carbon Rear Damper Stay Aluminum Rear Bulkhead Aluminum Rear Upper Arm Mount Aluminum Front Damper Mount Aluminum Steering Mount
Get in Quick as these ARE Limited Edition Kits an wont last long
Banzai Hobby Team
08-29-2013, 06:10 PM
#4
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Yokohama, JAPAN
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
New Kits from Tamiya now at Banzai Hobby!!!
1/14 King Hawler Black Edition Full Set
It is the assembly kit of electric radio control model that reproduced the trailer head of bonnet type that is said to be the king of the highway [king of fearless highway black color]. Body parts Offers precision molds painted in metallic black. Coupled with plated parts front grille and bumper, and air cleaner, I will bring on more fearless mood. Such as using a metal leaf spring front and rear suspension and a metal ladder frame, chassis finish full of feeling with high quality. fun to build up is also plentiful. Power train, the structure of the vehicle similar to driving a 2-axis rear wheel in the propeller shaft by mounting the motor on the front. It is possible to change gear while driving is equipped with a 3-speed transmission.
RTR Neo Scorcher - TT02B
The Terra Scorcher, a popular 4WD R/C buggy model from Tamiya's past line-up, makes a comeback as the Neo Scorcher on the TT-02B chassis! The TT-02B uses the TT-02 as s base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. It also includes a large wing to go with the newly-designed tough body, plus stickers based on the original Terra Scorcher's livery design.
This iteration of the Neo Scorcher comes as a Ready-to-Run (Expert Built) model. Tamiya's Expert Built (XB) series provides instant R/C excitement without the need for assembly. All the same spare and Hop-Up-Up parts as the assembly kit can be used to maintain and upgrade the Ready-To-Run model.
Please Check us out on Facebook for Weekly Updates and Specials
Banzai Hobby Team
1/14 King Hawler Black Edition Full Set
It is the assembly kit of electric radio control model that reproduced the trailer head of bonnet type that is said to be the king of the highway [king of fearless highway black color]. Body parts Offers precision molds painted in metallic black. Coupled with plated parts front grille and bumper, and air cleaner, I will bring on more fearless mood. Such as using a metal leaf spring front and rear suspension and a metal ladder frame, chassis finish full of feeling with high quality. fun to build up is also plentiful. Power train, the structure of the vehicle similar to driving a 2-axis rear wheel in the propeller shaft by mounting the motor on the front. It is possible to change gear while driving is equipped with a 3-speed transmission.
RTR Neo Scorcher - TT02B
The Terra Scorcher, a popular 4WD R/C buggy model from Tamiya's past line-up, makes a comeback as the Neo Scorcher on the TT-02B chassis! The TT-02B uses the TT-02 as s base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. It also includes a large wing to go with the newly-designed tough body, plus stickers based on the original Terra Scorcher's livery design.
This iteration of the Neo Scorcher comes as a Ready-to-Run (Expert Built) model. Tamiya's Expert Built (XB) series provides instant R/C excitement without the need for assembly. All the same spare and Hop-Up-Up parts as the assembly kit can be used to maintain and upgrade the Ready-To-Run model.
Please Check us out on Facebook for Weekly Updates and Specials
Banzai Hobby Team
09-20-2013, 10:37 PM
#5
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Yokohama, JAPAN
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
GoPro Monster S.S. Swift - M05
The GoPro Monster Sport Super Swift is a 6-time consecutive winner of the Pikes Peak International Hill Climb race held in the U.S. It is based on the Suzuki Swift and custom-built by Monster Sport. The 4WD car features wind tunnel-tested aerodynamics and a 400hpplus 1.9-liter engine.
The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering.
Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya
RTR GoPro Monster S.S Swift - M05
The GoPro Monster Sport Super Swift is a 6-time consecutive winner of the Pikes Peak International Hill Climb race held in the U.S. It is based on the Suzuki Swift and custom-built by Monster Sport. The 4WD car features wind tunnel-tested aerodynamics and a 400hpplus 1.9-liter engine.
The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering.
Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya.
This iteration of the GoPro Monster Sport Super Swift comes as a Ready-to-Run (Expert Built) model. Tamiya's Expert Built (XB) series provides instant R/C excitement without the need for assembly. All the same spare and Hop-Up-Up parts as the assembly kit can be used to maintain and upgrade the Ready-To-Run model.
RTR F2012 - F104
This is a fully factory assembled and ready-to-run R/C model of the Ferrari F2012. The super detailed polycarbonate body is mated to the easy to maintain F104 2WD on-road platform. The Ferrari F2012 features a 2WD rear wheel drive drive-train with king-pin independent suspension and a rear solid axle T-plate mono-shock suspension. The pre-installed 2-channel radio gear system operates on 2.4Ghz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby
The GoPro Monster Sport Super Swift is a 6-time consecutive winner of the Pikes Peak International Hill Climb race held in the U.S. It is based on the Suzuki Swift and custom-built by Monster Sport. The 4WD car features wind tunnel-tested aerodynamics and a 400hpplus 1.9-liter engine.
The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering.
Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya
RTR GoPro Monster S.S Swift - M05
The GoPro Monster Sport Super Swift is a 6-time consecutive winner of the Pikes Peak International Hill Climb race held in the U.S. It is based on the Suzuki Swift and custom-built by Monster Sport. The 4WD car features wind tunnel-tested aerodynamics and a 400hpplus 1.9-liter engine.
The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering.
Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya.
This iteration of the GoPro Monster Sport Super Swift comes as a Ready-to-Run (Expert Built) model. Tamiya's Expert Built (XB) series provides instant R/C excitement without the need for assembly. All the same spare and Hop-Up-Up parts as the assembly kit can be used to maintain and upgrade the Ready-To-Run model.
RTR F2012 - F104
This is a fully factory assembled and ready-to-run R/C model of the Ferrari F2012. The super detailed polycarbonate body is mated to the easy to maintain F104 2WD on-road platform. The Ferrari F2012 features a 2WD rear wheel drive drive-train with king-pin independent suspension and a rear solid axle T-plate mono-shock suspension. The pre-installed 2-channel radio gear system operates on 2.4Ghz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby
