B6 charger on NiCds
10-26-2010, 12:54 AM
#1
Thread Starter
B6 charger on NiCds
Does B6 check for cell count on Nicad mode?
On one incidence, the voltage reached 8.3V on a 5 cell receiver pack.....
Another incidence on a single cell glow driver, voltage reached 1.78 and rising and capacity reached 1350mah and still rising on a 1,300 mah pack ......
Thanks in advance for any input,
Barry
On one incidence, the voltage reached 8.3V on a 5 cell receiver pack.....
Another incidence on a single cell glow driver, voltage reached 1.78 and rising and capacity reached 1350mah and still rising on a 1,300 mah pack ......
Thanks in advance for any input,
Barry
10-28-2010, 08:28 PM
#3
My Feedback: (1)
Join Date: May 2003
Location: North Las VegasNV
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
RE: B6 charger on NiCds
When you set it up first select the battery type then the capasity of the battery . Hold down on the enter button till it displays bat chec then it starts charging
