Propeller Installation Question
#26
Thread Starter
Join Date: Aug 2009
Location: , AZ
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Propeller Installation Question
Thanks for all the responses. Regarding prop size, the comments are well taken. I know the 10" is undersized which is why I was only looking into trying the 4 blade. Max prop diameter is 11", and I had been leaning in that direction anyway. Thanks
#28
My Feedback: (4)
RE: Propeller Installation Question
ORIGINAL: albietz
Thanks for all the responses. Regarding prop size, the comments are well taken. I know the 10'' is undersized which is why I was only looking into trying the 4 blade. Max prop diameter is 11'', and I had been leaning in that direction anyway. Thanks
Thanks for all the responses. Regarding prop size, the comments are well taken. I know the 10'' is undersized which is why I was only looking into trying the 4 blade. Max prop diameter is 11'', and I had been leaning in that direction anyway. Thanks
Regards
Scott
#29
My Feedback: (4)
RE: Propeller Installation Question
ORIGINAL: albietz
Thanks for all the responses. Regarding prop size, the comments are well taken. I know the 10'' is undersized which is why I was only looking into trying the 4 blade. Max prop diameter is 11'', and I had been leaning in that direction anyway. Thanks
Thanks for all the responses. Regarding prop size, the comments are well taken. I know the 10'' is undersized which is why I was only looking into trying the 4 blade. Max prop diameter is 11'', and I had been leaning in that direction anyway. Thanks
Regards
Scott
#31
RE: Propeller Installation Question
http://downloads.hobbico.com/evpl/osm/ev15610.pdf be sure the item # 10 washer is there. It is easy to lose and NOT be noticed.