Midwest Extra 300xs Build
#376
Member
Join Date: Jan 2003
Location: Ottawa,
ON, CANADA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
Fuel tank used is a Dubro S-16. I also tried the aluminum landing gear and carbon fiber landing gear and there is no flight characteristics change. With the DA-50 I don't need more than 1/4 of throttle, a lot of Power!!!!!!!!
#377
Junior Member
Join Date: Apr 2008
Location: Fort Worth,
TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
Hey Digger,
Your build looks like its going well. I picked up my Extra right off the attic shelf, a friend was clearing some of his inventory. And is going into jets. The plane is about three quarters built,fully covered, I hope this will be a good thing after seeing all of the adds you have encountered. A G-45 came with this model, brand new in the box. I have been looking at the DA's too. I am ready to start putting the pieces together, checking CG will be the first thing I do "Thanks to you guy's". Thanks for the heads-up Cyberwolf.
Neil[img][/img]
Your build looks like its going well. I picked up my Extra right off the attic shelf, a friend was clearing some of his inventory. And is going into jets. The plane is about three quarters built,fully covered, I hope this will be a good thing after seeing all of the adds you have encountered. A G-45 came with this model, brand new in the box. I have been looking at the DA's too. I am ready to start putting the pieces together, checking CG will be the first thing I do "Thanks to you guy's". Thanks for the heads-up Cyberwolf.
Neil[img][/img]
#379
Junior Member
Join Date: Apr 2008
Location: Fort Worth,
TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
Hey Vinnie, you've gotta sharp eye. Without a doubt one of the best planes I have flown to date.[img][/img]
Here's some of my Extra, oooppp's my bad
Here's some of my Extra, oooppp's my bad
#381
Thread Starter
My Feedback: (4)
Join Date: Dec 2004
Location: Newnan,
GA
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
ORIGINAL: lway45
Hey it's now 10/18/08, where are you at with the build? What happened? No new post. Hope everything is ok.
Hey it's now 10/18/08, where are you at with the build? What happened? No new post. Hope everything is ok.
No time at all, work has me buried this year. Hopefully this will change soon.
Bob
#382
RE: Midwest Extra 300xs Build
ORIGINAL: Digger44
No time at all, work has me buried this year. Hopefully this will change soon.
Bob
ORIGINAL: lway45
Hey it's now 10/18/08, where are you at with the build? What happened? No new post. Hope everything is ok.
Hey it's now 10/18/08, where are you at with the build? What happened? No new post. Hope everything is ok.
No time at all, work has me buried this year. Hopefully this will change soon.
Bob
I just starter my Midwest Extra 300s. I bought the kit when it first released, 1995, or 96 I think.
Now I have time and work area to build it, along with a 1/3 scale lanier laser 200.
#384
RE: Midwest Extra 300xs Build
ORIGINAL: rodrumfunk
hola, estoy por pegar el elevador y el timon. me podrias decir la incidencia del ala y del estabilizador, gracias
hola, estoy por pegar el elevador y el timon. me podrias decir la incidencia del ala y del estabilizador, gracias
Paul
#385
Thread Starter
My Feedback: (4)
Join Date: Dec 2004
Location: Newnan,
GA
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
ORIGINAL: KI8FR
Ok What did he say? lol I think I need to get a translat program in here. lol
Paul
ORIGINAL: rodrumfunk
hola, estoy por pegar el elevador y el timon. me podrias decir la incidencia del ala y del estabilizador, gracias
hola, estoy por pegar el elevador y el timon. me podrias decir la incidencia del ala y del estabilizador, gracias
Paul
I hope it was good.. LOL
#386
Member
Join Date: Jan 2003
Location: Ottawa,
ON, CANADA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
hola, estoy por pegar el elevador y el timon. me podrias decir la incidencia del ala y del estabilizador, gracias
Trnaslation:
Hello, i am goint to glue the elevator and rudder. Could you please tell me the wind ans stabalizer incidence?, Thanks.
Trnaslation:
Hello, i am goint to glue the elevator and rudder. Could you please tell me the wind ans stabalizer incidence?, Thanks.
#387
Junior Member
Join Date: Apr 2009
Location: OsornoLos Lagos, CHILE
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
Hola bar98, soy de Chile, me gustarÃ*a saber si tienes el manual del extra 300XS de la midwest, y si tendrÃ*as por ahi el diseñoi de las costillas para cortarlas en foam.-
Muchas gracias de antemano
Rodrigo
Muchas gracias de antemano
Rodrigo
#388
Junior Member
Join Date: Apr 2009
Location: OsornoLos Lagos, CHILE
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
Hi there, i am from chile, and i want to know if any of you have the manual of the midwest extra 300 XS 80", if you have it, can you send it to my email
[email protected]
Thanks a lot.
RO-RO
[email protected]
Thanks a lot.
RO-RO
#392
Junior Member
Join Date: Apr 2009
Location: OsornoLos Lagos, CHILE
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
There is nothing on my inbox, or in my spam, i'm going to wait, maybe it a little heavy, and its going to be delay...
Thanks a lot again...
RO-RO
i'm going to put some photos of my model, i just mark the fuselage in the plywood... this weekend i will cut it...
Thanks a lot again...
RO-RO
i'm going to put some photos of my model, i just mark the fuselage in the plywood... this weekend i will cut it...
#394
#395
Junior Member
Join Date: Apr 2009
Location: OsornoLos Lagos, CHILE
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
Yes it is correct.
Can you send it again please, if this is not too much...
I'm going to be extremly glad
Thanks a lot again
RO-RO
Can you send it again please, if this is not too much...
I'm going to be extremly glad
Thanks a lot again
RO-RO
#397
Junior Member
Join Date: Apr 2009
Location: OsornoLos Lagos, CHILE
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Midwest Extra 300xs Build
Thanks lway45, i recive it...
This help me a lot whit the build, i am doing from plans, not kit, so is going to take a long time to build it... jejeje
Thanks again
RO-RO
This help me a lot whit the build, i am doing from plans, not kit, so is going to take a long time to build it... jejeje
Thanks again
RO-RO
#400