Reversing the shaft on a turnigy 2836-1200
#1
Thread Starter
Join Date: Jan 2013
Location: jacksonville, FL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Reversing the shaft on a turnigy 2836-1200
Hi I'm new at electric motors and I'm in the process of building a foamy hummer and I bought this motor to put in it .the plane calls for the motor mount to be in the back but in this motor it's in the front and the back of it doesn't have enough prop shaft hence does anyone knows how to remove and reverse it thanks for any help I can get
#2
Join Date: Sep 2002
Location: Nijmegen / Nederland
Posts: 628
Likes: 0
Received 22 Likes
on
17 Posts
Outrunner Disassembly and Stripping - RCG
Changing a shaft & grinding a flat on shaft
www.innov8tivedesigns.com
Making and Replacing a Brushless Motor Shaft - RCG
The tools needed are:
Vriendelijke groeten Ron
- Disassembly
- Removing the shaft
- Removing the bearings
Changing a shaft & grinding a flat on shaft
www.innov8tivedesigns.com
- → resources
- → video classroom
Making and Replacing a Brushless Motor Shaft - RCG
The tools needed are:
- 3/8" or 1/4" drill motor
- Dremel tool with #409 abrasive cutting disc and #402 arbor
Vriendelijke groeten Ron