Carden 30% cap , Did i screw up ?????
#1
Senior Member
Thread Starter
My Feedback: (33)
Join Date: Jul 2002
Location: Oxford, MS
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Carden 30% cap , Did i screw up ?????
i bought a carden 30% cap yesterday from a friend that he has had for a few years that is still brand new in the box. I bought the plane because the price was right and i wanted a good beginner imac plane and a plane that would do 3D also. i was just wondering what you guys think of this plane and if you any comments on the build of it. It came with a 3w 75 engine and a complete hardware kit from carden. any input would be appreciated. [:-]
Chad
Chad
#5
Senior Member
My Feedback: (3)
RE: Carden 30% cap , Did i screw up ?????
It will be a monster. Be cautioned here, 3W 75, Carden 30% CAP232, and full throttle straight and level equals high potential for catastrophic failure. You have a VERY unlimited combination. Lighten what you can for 3Ds sake but do not scimp on critcal mountings (servo mounting, firewall, hinges, horns, etc.). The 75 will give unlimited performance with 24-26 pounds, you should come close to 19-20.
To answer your basic question, you have not made an error of any kind.
Mark
To answer your basic question, you have not made an error of any kind.
Mark