good baseline tune after run-in for matrix tr arena?
#1
Member
Thread Starter
Join Date: Mar 2007
Location: sydney, AUSTRALIA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
good baseline tune after run-in for matrix tr arena?
hi guys,
i ran in my engine in (used 1liter of fuel) & just want to know what is a good baseline to start from after this period?
it is extremely rich & boggy up top for now, currently set as follows (purely for my run-in):
top end: 2 1/2 turns out
bottom end: 2 turns in from flush
now the bottom end tune is sorted as it idles perfectly - i can probably go a little bit more leaner by turning it in more from flush HOWEVER the top end is rich once i accelerate so what should i set my top end at?
regards,
i ran in my engine in (used 1liter of fuel) & just want to know what is a good baseline to start from after this period?
it is extremely rich & boggy up top for now, currently set as follows (purely for my run-in):
top end: 2 1/2 turns out
bottom end: 2 turns in from flush
now the bottom end tune is sorted as it idles perfectly - i can probably go a little bit more leaner by turning it in more from flush HOWEVER the top end is rich once i accelerate so what should i set my top end at?
regards,
#2
Junior Member
Join Date: Feb 2007
Location: Grand Falls,
NB, CANADA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
RE: good baseline tune after run-in for matrix tr arena?
Hey Marko,
I just broke in my Matrix TR Arena engine on the weekend. I am still undergoing the tuning process. I should have it all tuned this weekend.
You should watch these two videos. I will give you a head start on how to tune your engine. It is very informative.
Hope this helps you out!
[link=http://www.youtube.com/watch?v=oSmMzpZM_As]Nitro Tuning - Part 1[/link]
[link=http://www.youtube.com/watch?v=BJFsJAxNoRg&mode=related&search=]Nitro Tuning - Part 2[/link]
~ Simply Unreal
I just broke in my Matrix TR Arena engine on the weekend. I am still undergoing the tuning process. I should have it all tuned this weekend.
You should watch these two videos. I will give you a head start on how to tune your engine. It is very informative.
Hope this helps you out!
[link=http://www.youtube.com/watch?v=oSmMzpZM_As]Nitro Tuning - Part 1[/link]
[link=http://www.youtube.com/watch?v=BJFsJAxNoRg&mode=related&search=]Nitro Tuning - Part 2[/link]
~ Simply Unreal