JT RACING FUNFACTOR CHASSIS
#1
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Auckland , NEW ZEALAND
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
JT RACING FUNFACTOR CHASSIS
OK first of all this is not a for sale add....
If there is any interest from you guys here on the forum, I may get rid of my JT Racing Chassis (complete with shock towers & braces).
Also on the chopping block is some 2WD parts...the 2WD driveshaft, spur gear, slipper assembly, plastic brake seat, brake, hubs, axles, cups, standard chassis, 2.2 wheels and tyres (2 sets)...everything really APART FROM the engine, gearboxes, diff, susp arms, shocks, radio gear, radio box, gas tank.
PM me for more info...(and photos) [:-]
If there is any interest from you guys here on the forum, I may get rid of my JT Racing Chassis (complete with shock towers & braces).
Also on the chopping block is some 2WD parts...the 2WD driveshaft, spur gear, slipper assembly, plastic brake seat, brake, hubs, axles, cups, standard chassis, 2.2 wheels and tyres (2 sets)...everything really APART FROM the engine, gearboxes, diff, susp arms, shocks, radio gear, radio box, gas tank.
PM me for more info...(and photos) [:-]
#2
Senior Member
Join Date: Apr 2004
Location: Cleethorpes, UNITED KINGDOM
Posts: 2,077
Likes: 0
Received 0 Likes
on
0 Posts
RE: JT RACING FUNFACTOR CHASSIS
Whoa there! A common as muck (NOT!) JT Chassis you say?
Gotta say Im very tempted. But Ive got one already, no need to be greedy.
Seriously guys, these JT chassis` are hard as nails, no flex, no bend centre shafts, no more stripped spurs. These things can take a .30 engine and some serious abuse - with no issues. You try that with a stock FF chassis... they flex with the OS.18 CVR-X in there...
Only fair to give you guys a shot. If no-one wants it, then I might just have to buy it as a spare, just in case! Just add a set of DrHondas shock towers and you`re fully made up.
Gotta say Im very tempted. But Ive got one already, no need to be greedy.
Seriously guys, these JT chassis` are hard as nails, no flex, no bend centre shafts, no more stripped spurs. These things can take a .30 engine and some serious abuse - with no issues. You try that with a stock FF chassis... they flex with the OS.18 CVR-X in there...
Only fair to give you guys a shot. If no-one wants it, then I might just have to buy it as a spare, just in case! Just add a set of DrHondas shock towers and you`re fully made up.
#4
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Auckland , NEW ZEALAND
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
RE: JT RACING FUNFACTOR CHASSIS
OKAY...UPDATE
JT chassis is up for sale [link=http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMESE%3AIT&viewitem=&item=290053678134&rd=1&rd=1]HERE[/link]
Alvinl your parts will be sent today.
Scouser, did you get my PM?
JT chassis is up for sale [link=http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMESE%3AIT&viewitem=&item=290053678134&rd=1&rd=1]HERE[/link]
Alvinl your parts will be sent today.
Scouser, did you get my PM?
#6
RE: JT RACING FUNFACTOR CHASSIS
Got your p.m. cheers mate. Had a problem with paypal though and wont have any funds in there for about ten days!! Not my fault either!!
It was the 2wd parts that I really need but I also need the hubs.
It was the 2wd parts that I really need but I also need the hubs.
#7
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Auckland , NEW ZEALAND
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
RE: JT RACING FUNFACTOR CHASSIS
Ok I have left the following parts:
4x Dogbones
2x CVD's
2 pair diff cups
6 x single diff cups (with pin) (2 with diff cup mod)
8x 4WD hubs (with pivot balls etc, and one set of bearings)
One way front diff
1x 14mm (Dr Honda) hexes.
Standard chassis (used, complete)
Some of the above parts are new some are used.
oh yea I also have a set of 4 new hubs modded to fit Jato shafts,
They come complete with bearings AND A SET OF JATO SHAFTS...never ended up doing the mod, went with the TMaxx mod instead (all brand new parts).
4x Dogbones
2x CVD's
2 pair diff cups
6 x single diff cups (with pin) (2 with diff cup mod)
8x 4WD hubs (with pivot balls etc, and one set of bearings)
One way front diff
1x 14mm (Dr Honda) hexes.
Standard chassis (used, complete)
Some of the above parts are new some are used.
oh yea I also have a set of 4 new hubs modded to fit Jato shafts,
They come complete with bearings AND A SET OF JATO SHAFTS...never ended up doing the mod, went with the TMaxx mod instead (all brand new parts).
#8
Senior Member
Join Date: Jul 2003
Location: birmingham, UNITED KINGDOM
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
RE: JT RACING FUNFACTOR CHASSIS
Azzman are you leaving old cen to?[&:]
Grrr a few months ago I would of bought that chassis right away! always fanced one of them [&o]
Grrr a few months ago I would of bought that chassis right away! always fanced one of them [&o]