CEN GSR 5.0
#1
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Kyle, TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
CEN GSR 5.0
Does anyone know the o-ring size for the carb body to engine block, there are two orings (upper and lower). Please specify sizes as 10mm ID and 2mm CS (cross section). The carb body measures 14mm w/ calipers or a link w/ the part#'s. You can buy the complete carb or the body w/ orings from CEN, but not just the orings.
Thanks in advance!
Thanks in advance!