newbie need info on gst7.7(part2)
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: saegertown, PA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
newbie need info on gst7.7(part2)
got tiered of everyone not talking about rc and just complaining on other thread got my gst pretty much broke in on 9th tank now i put a ofna check valve primer on it and was wondering were to start with the settings havent had no problems with this engine so far and would like a base point to start out with the settings before i start it with this check valve on it didnt have a problem with it stalling out at half tank but havent really run it hard so i figured i would put it on before i had the problem
#2
Junior Member
Thread Starter
Join Date: Mar 2010
Location: saegertown, PA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
RE: newbie need info on gst7.7(part2)
i also have four wheel steer on this truck great for spining around and small area bashing not good for speed so i made a steering locker for it and a switch to turn off the rear servo works great goes straight when locked only costed me $3.00 for the parts and switch to make it