Dalotel
#1
Thread Starter
My Feedback: (29)
Dalotel
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62" or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
#3
Senior Member
My Feedback: (1)
RE: Dalotel
ORIGINAL: speedracerntrixie
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62'' or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62'' or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
No doubt you will be welcomed with open arms!!! (You can use the pipe and retracts too!)
There is no specified list in the Classic Pattern Association- there is the emphasis on the classic airplanes that flew the pattern one pass at a time, however. It is all about having fun. The main perameter is that the wingspan stays within 72inches (ish) or less. But if all you have is something slightly larger, you won't be turned away for that either....
Robert Fish (KLXMASTER14 on RCU) is a great CPA contact for your region.
Check out this site too: www.classicpatternassociation.com
Brian
#5
Thread Starter
My Feedback: (29)
RE: Dalotel
Good news Brian. I didn't think there would be an issue but you never know. As things usually work, the more I think about it the more complicated it gets. Rather then have the the pipe hang under the fuse, I will want a pipe tunnel. This means pug-in wings. I have a cowl mold from when I built a Rogas Modell Dalotel so I will lay one up and then start making some drawings. Looks like the wings and tail will be foam, the upper nose and canopy will be glass. I think strigers for the turtle deck to keep some scale appeal. Then again may go foam. Gotta think about it more.
#6
My Feedback: (3)
Join Date: Apr 2008
Location: Montreal,
QC, CANADA
Posts: 5,200
Likes: 0
Received 5 Likes
on
5 Posts
RE: Dalotel
Check out the Bridi Dalotel. It has plug in wings and the pipe tunnel.
Redesign that sucker, take out some of the fat, and she'll be sweet. Might have to scale down some too.
Might want to do a thread search for a design thread I started "TOC CAP 21". There's some Dalo info in there too.
David
Redesign that sucker, take out some of the fat, and she'll be sweet. Might have to scale down some too.
Might want to do a thread search for a design thread I started "TOC CAP 21". There's some Dalo info in there too.
David
#7
Thread Starter
My Feedback: (29)
RE: Dalotel
David, I had a Bridi kit at one time. Made a ton of mods including trimming it down to 2M and used a wing tube. Sadly never finished it, A bud of mine talked me out of it and the MVVS 1.40 twin I had for it. I have also had a Rogas Modell Dalotel that ended up being powered with a YS .91. Been looking for another Dalotel with no luck. I recently picked up an original Bridi Kaos built about 30 years ago and went out and flew it, had a blast. I have been considering a classic pattern airplane but being me I want something off the beaten path. A slimmed down Dalotel with retracts and a piped Rossi .61 is what comes to mind.
#8
My Feedback: (43)
RE: Dalotel
I have a Hanson daltotel with a Rossi .60 RE with an internal pipe. the engine is side mounted and the head and header is hidden in the cheek on the cowl. The pipe is inside the fuse in its own pipe chamber. A silicone tube directs exhaust goo out the bottom of the fuse behind the wing. It was bought from a member on here, hrrcflyer, and there are pics somewhere on this forum.
#9
Thread Starter
My Feedback: (29)
RE: Dalotel
After a few days thought, I drew out enough of a plan sheet to get started. I have a good stockpile of Sig 1/16 contest sheet so I will be using as much of that throughout construction as possible. The fuse sides will be 1/16 with 1/16 vertical grain doublers. Formers will be 2 layers of the 1/16 with 2 oz cloth laminated between, The hatch, canopy , turtle deck and flying surfaces will be sheeted foam. Anyone up for yet another build thread?
#11
Thread Starter
My Feedback: (29)
RE: Dalotel
Length is 60" and span will be 62". Looking at about 650-700 Sq in and 7.5-8 lbs. The Rossi I have should pull it around well. I have been using it for Warbird racing and have been swinging an APC 11X11 at 13,500 on the ground. Will most likely set it up with a 13X8 for starters. Not sure what retracts to use, with plug in wings mechanicals can be a hastle so may go with electrics.
#14
RE: Dalotel
ORIGINAL: speedracerntrixie
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62" or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62" or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
Dalotels are cool and if it's a 60 powered model on a pipe I don't see any CD telling you to take it home. Consider that Jon Carter, Tony F, etc will be running said contests, no way they're going to send you packing. Begging you to enter is more like it. Classic Pattern is not Senior Pattern, no list in CPA. SPA has a lis.
I like the idea, I like your Laser too. Build it and bring it to some contests.
Chris...
#16
Thread Starter
My Feedback: (29)
RE: Dalotel
Chris, thanks for the support. I agree that Jon and Tony would not turn me away unless there were issues with other pilots. Being a CD means some politics after all. funny how things turn out though. Jon and I are members of the same club and have known one another for years. I first met Tony way back in '83 when we were both flying Schluter helicopters. At the time he was flying demos at the IMS ( Now AMA) show in Anaheim. Looks like I will be moving forward with the build. First task will be to clean up the cowl molds and lay up a cowl.
#18
My Feedback: (3)
Join Date: Apr 2008
Location: Montreal,
QC, CANADA
Posts: 5,200
Likes: 0
Received 5 Likes
on
5 Posts
RE: Dalotel
ORIGINAL: speedracerntrixie
David, I had a Bridi kit at one time. Made a ton of mods including trimming it down to 2M and used a wing tube. Sadly never finished it, A bud of mine talked me out of it and the MVVS 1.40 twin I had for it. I have also had a Rogas Modell Dalotel that ended up being powered with a YS .91. Been looking for another Dalotel with no luck. I recently picked up an original Bridi Kaos built about 30 years ago and went out and flew it, had a blast. I have been considering a classic pattern airplane but being me I want something off the beaten path. A slimmed down Dalotel with retracts and a piped Rossi .61 is what comes to mind.
David, I had a Bridi kit at one time. Made a ton of mods including trimming it down to 2M and used a wing tube. Sadly never finished it, A bud of mine talked me out of it and the MVVS 1.40 twin I had for it. I have also had a Rogas Modell Dalotel that ended up being powered with a YS .91. Been looking for another Dalotel with no luck. I recently picked up an original Bridi Kaos built about 30 years ago and went out and flew it, had a blast. I have been considering a classic pattern airplane but being me I want something off the beaten path. A slimmed down Dalotel with retracts and a piped Rossi .61 is what comes to mind.
Are you planning to do foam for the wing, stab and fin? What airfoils?
It looks like you are also planning on a removable fuse pan, or will you do a simple tunnel Bridi style?
Nice mold for the cowl. Where does it come from?
Access to the fuse from a canopy hatch?
David
#19
Thread Starter
My Feedback: (29)
RE: Dalotel
Dave, the fin will be a nomex honeycomb core with 1/16 balsa sheeting, the rudder will be built up balsa. Wings and stab will be sheeted foam. Wing airfoil is one that I designed a couple years ago and is working well on other models. The pipe tunnel is a simple sub floor just below the wing tube. Access will be through the top via removeable canopy from the back edge of the cowl to the turtle deck. The cowl mold came from an old Rogas Modell Dalotel kit. It came with a plastic cowl that I used as a plug to make the mold so I could lay up a glass cowl for that airplane.
#21
Senior Member
Join Date: Apr 2011
Location: Rancho Santa Margarita,
CA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dalotel
ORIGINAL: speedracerntrixie
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62" or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62" or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I have built a e-powered Conquest IVe and been welcomed with open arms. (I just dont have the patients for nitro anymore.) The guys even had fun ribbing me about my power plant as you can see in the photo.
I too was hot to build a Dalotel as I watched Chip Hyde fly one in Masters when I first started flying pattern in the mid 80's. Then I saw the MK Super Chipmunk S and I fell in love......See picture below.
Doxilia are working together on making the Super Chipmunk over on RC Groups. If you have an interest, David has CAD designed the plane and will be having the balsa laser cut. We will be producing the foam cores here in So Cal. I am sure you could convert to Nitro if you wanted to put a pipe down the bottom like the original. Just a thought, either way, I pyched to see you do this and hope to see you in person at a West Coast CPA event.
Doug
#22
My Feedback: (58)
Join Date: Nov 2002
Location: Knoxville,
TN
Posts: 1,807
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dalotel
Jim,
As always you can find CPA events / contest on the CPA website www.classicpatternassociation.com The first CA event will be in February.
Call cards for the new patterns will be posted soon. You can see the new patterns here http://www.classicpatternassociation...formation.html
As always you can find CPA events / contest on the CPA website www.classicpatternassociation.com The first CA event will be in February.
Call cards for the new patterns will be posted soon. You can see the new patterns here http://www.classicpatternassociation...formation.html
#23
My Feedback: (204)
Join Date: Jan 2002
Location: Va Beach, VA
Posts: 1,189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dalotel
ORIGINAL: 80sPattern
You will be welcome with open arms. No fussiness with designs out here on the Left Coast. Contests are just getting started with Tony's Landcaster contest in November being one of the first. He is planning one for February as well.
I have built a e-powered Conquest IVe and been welcomed with open arms. (I just dont have the patients for nitro anymore.) The guys even had fun ribbing me about my power plant as you can see in the photo.
I too was hot to build a Dalotel as I watched Chip Hyde fly one in Masters when I first started flying pattern in the mid 80's. Then I saw the MK Super Chipmunk S and I fell in love......See picture below.
Doxilia are working together on making the Super Chipmunk over on RC Groups. If you have an interest, David has CAD designed the plane and will be having the balsa laser cut. We will be producing the foam cores here in So Cal. I am sure you could convert to Nitro if you wanted to put a pipe down the bottom like the original. Just a thought, either way, I pyched to see you do this and hope to see you in person at a West Coast CPA event.
Doug
ORIGINAL: speedracerntrixie
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62'' or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62'' or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I have built a e-powered Conquest IVe and been welcomed with open arms. (I just dont have the patients for nitro anymore.) The guys even had fun ribbing me about my power plant as you can see in the photo.
I too was hot to build a Dalotel as I watched Chip Hyde fly one in Masters when I first started flying pattern in the mid 80's. Then I saw the MK Super Chipmunk S and I fell in love......See picture below.
Doxilia are working together on making the Super Chipmunk over on RC Groups. If you have an interest, David has CAD designed the plane and will be having the balsa laser cut. We will be producing the foam cores here in So Cal. I am sure you could convert to Nitro if you wanted to put a pipe down the bottom like the original. Just a thought, either way, I pyched to see you do this and hope to see you in person at a West Coast CPA event.
Doug
#24
RE: Dalotel
ORIGINAL: speedracerntrixie
If memory serves me correctly, that was a Hanson Dalotel at the Reno Nats
ORIGINAL: PatternPilot
No worries.. did some research and the Dalotel was flown in pattern competition in 1984.....
cpa#2
No worries.. did some research and the Dalotel was flown in pattern competition in 1984.....
cpa#2
That about clears that up. Build away!
Chris...
#25
My Feedback: (60)
Join Date: Oct 2003
Location: Bowie,
MD
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dalotel
I am definitely interested in a couple of the super chipmunk s kits..
ORIGINAL: 80sPattern
You will be welcome with open arms. No fussiness with designs out here on the Left Coast. Contests are just getting started with Tony's Landcaster contest in November being one of the first. He is planning one for February as well.
I have built a e-powered Conquest IVe and been welcomed with open arms. (I just dont have the patients for nitro anymore.) The guys even had fun ribbing me about my power plant as you can see in the photo.
I too was hot to build a Dalotel as I watched Chip Hyde fly one in Masters when I first started flying pattern in the mid 80's. Then I saw the MK Super Chipmunk S and I fell in love......See picture below.
Doxilia are working together on making the Super Chipmunk over on RC Groups. If you have an interest, David has CAD designed the plane and will be having the balsa laser cut. We will be producing the foam cores here in So Cal. I am sure you could convert to Nitro if you wanted to put a pipe down the bottom like the original. Just a thought, either way, I pyched to see you do this and hope to see you in person at a West Coast CPA event.
Doug
ORIGINAL: speedracerntrixie
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62'' or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I've been looking into this classic pattern. My question is mainly focused on events in California and from what I have seen they may not be super rigid on what they are considering a classic pattern airplane. I'm considering a build of a 62'' or so Dalotel powered with a piped .60. Obviously I would hate to do the build and then be turned away from a contest. My thought is that if it were built to what the AMA pattern rules were back in the early '80's why would it not be legal to fly in todays classic pattern events? Thanks for inputs.
I have built a e-powered Conquest IVe and been welcomed with open arms. (I just dont have the patients for nitro anymore.) The guys even had fun ribbing me about my power plant as you can see in the photo.
I too was hot to build a Dalotel as I watched Chip Hyde fly one in Masters when I first started flying pattern in the mid 80's. Then I saw the MK Super Chipmunk S and I fell in love......See picture below.
Doxilia are working together on making the Super Chipmunk over on RC Groups. If you have an interest, David has CAD designed the plane and will be having the balsa laser cut. We will be producing the foam cores here in So Cal. I am sure you could convert to Nitro if you wanted to put a pipe down the bottom like the original. Just a thought, either way, I pyched to see you do this and hope to see you in person at a West Coast CPA event.
Doug