Blue Angel - Build
#1376
Join Date: Mar 2011
Location: Niagara Region, Canada
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mike (8178),
Do you have any specific details on the epoxy and micro balloons that you used (as in the brand names of the products)? And is the combination really easy to sand and get very smooth? Looking at doing a project that requires lots of filling in of small screw holes and making them smooth so that they are not noticeable.
Do you have any specific details on the epoxy and micro balloons that you used (as in the brand names of the products)? And is the combination really easy to sand and get very smooth? Looking at doing a project that requires lots of filling in of small screw holes and making them smooth so that they are not noticeable.
#1377
Thread Starter
My Feedback: (17)
Hi Mike (8178),
Do you have any specific details on the epoxy and micro balloons that you used (as in the brand names of the products)? And is the combination really easy to sand and get very smooth? Looking at doing a project that requires lots of filling in of small screw holes and making them smooth so that they are not noticeable.
Do you have any specific details on the epoxy and micro balloons that you used (as in the brand names of the products)? And is the combination really easy to sand and get very smooth? Looking at doing a project that requires lots of filling in of small screw holes and making them smooth so that they are not noticeable.
Mike
#1378
Join Date: Mar 2011
Location: Niagara Region, Canada
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info Mike.
As to what material the screw holes are in.... they are in compressed cork with a 'rubberized' type clear coat (sealer?). So I am gathering that micro balloons can be mixed with any sort of epoxy or cement? Sorry if this is off-topic but this is the only place/thread where I could think of of asking these questions.
As to what material the screw holes are in.... they are in compressed cork with a 'rubberized' type clear coat (sealer?). So I am gathering that micro balloons can be mixed with any sort of epoxy or cement? Sorry if this is off-topic but this is the only place/thread where I could think of of asking these questions.
#1379
Thread Starter
My Feedback: (17)
Thanks for the info Mike.
As to what material the screw holes are in.... they are in compressed cork with a 'rubberized' type clear coat (sealer?). So I am gathering that micro balloons can be mixed with any sort of epoxy or cement? Sorry if this is off-topic but this is the only place/thread where I could think of of asking these questions.
As to what material the screw holes are in.... they are in compressed cork with a 'rubberized' type clear coat (sealer?). So I am gathering that micro balloons can be mixed with any sort of epoxy or cement? Sorry if this is off-topic but this is the only place/thread where I could think of of asking these questions.
Mike
#1380
Join Date: Dec 2015
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
do you have a file for the wing rib pattern for me?
I would like to build this plane also, but I have the same plans as you have without any wing rib drawings.
Greetings,
Maarten Nicolaas
the Netherlands
[email protected]
do you have a file for the wing rib pattern for me?
I would like to build this plane also, but I have the same plans as you have without any wing rib drawings.
Greetings,
Maarten Nicolaas
the Netherlands
[email protected]
#1381
Maarten, Mike gave a comprehensive discussion on his wing construction early on in this thread. Foam wing base of course, I don't think I've ever seen a rib file available. Surely other BA fans will know. Good luck and post a build thread if you start this project.
#1382
Thread Starter
My Feedback: (17)
My new FrSky X12S production system that takes its place next to my pre-beta test X12S http://www.rcuniverse.com/forum/rc-r...orus-x12s.html It is a pretty amazing system. The all CNC machined metal gimbals with Hall effect angle sensors are wonderful.
Mike
Mike
#1386
Thread Starter
My Feedback: (17)
Yes, I can remember when we were speculating that it might get 50K views!! Haven't flown the Blue Angel in a long time, but I think I will now that our cooler weather is here.
It was a long hot summer and I spent most of it playing with my new Arris 250 race quads. Learning about flight controllers, OSD and forcing myself to feel comfortable flying FPV. Harder than you would think after flying for decades from the ground to aircraft view.
Mike
It was a long hot summer and I spent most of it playing with my new Arris 250 race quads. Learning about flight controllers, OSD and forcing myself to feel comfortable flying FPV. Harder than you would think after flying for decades from the ground to aircraft view.
Mike
#1387
Hot summer, swamped with business and coaching my son's baseball team, I haven't flown much at all this year. With GMA closing my commute to the field time is about to get a lot worse.
#1388
Thread Starter
My Feedback: (17)
Mike
Last edited by 8178; 10-05-2017 at 05:56 PM.
#1389
Join Date: May 2013
Location: Moncton, NB, CANADA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Electric Blue Angel ?
Has anyone put together an electric power Blue Angel ? Is there room in the fuselage to go electric and have the plane balance?
Last edited by Creative RC; 09-13-2019 at 01:07 AM.
#1390
My Feedback: (3)
Join Date: Apr 2008
Location: Montreal,
QC, CANADA
Posts: 5,200
Likes: 0
Received 5 Likes
on
5 Posts
Just to expand on the comments on RCG regarding converting MK classics to electric, the main challenge is to figure out how to gain access to the LiPo pack - ideally from the top. Locating a 6s5000 pack in the tank compartment is a non-issue as they’re smaller than a 16 (even 12 in some cases) oz tank. Some weight redistribution of the radio may be needed due to the additional “nose” weight brought about by the motor/ESC/LiPo combo which weight more than an engine/tank and fuel. Wisely locating servos and the radio pack usually solves this problem including the possibility of installing twin elevator servos in the tail boom. Sometimes the radio battery also needs to sit behind the wing TE under a hatch much in the same way that the tail servos are located in the MK Skymaster.
A little creative former redesign and lite ply floor additions in the canopy area can produce a removable assembly for access to the LiPo located on a tray with the motors ESC just aft of the FW which can be moved forward a fair amount given the requirements of 50 mm can outrunner.
Also, Mike Seale scratch built both a BA as well as an Atlas using the same electric retracts and electric power systems. Here are the build logs and an excellent reference:
https://www.rcgroups.com/forums/show...-pre-build-log
https://www.rcgroups.com/forums/show...?2542547-Atlas
David
A little creative former redesign and lite ply floor additions in the canopy area can produce a removable assembly for access to the LiPo located on a tray with the motors ESC just aft of the FW which can be moved forward a fair amount given the requirements of 50 mm can outrunner.
Also, Mike Seale scratch built both a BA as well as an Atlas using the same electric retracts and electric power systems. Here are the build logs and an excellent reference:
https://www.rcgroups.com/forums/show...-pre-build-log
https://www.rcgroups.com/forums/show...?2542547-Atlas
David
Last edited by doxilia; 09-17-2019 at 12:02 PM.
#1391
Join Date: May 2013
Location: Moncton, NB, CANADA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Just to expand on the comments on RCG regarding converting MK classics to electric, the main challenge is to figure out how to gain access to the LiPo pack - ideally from the top. Locating a 6s5000 pack in the tank compartment is a non-issue as they’re smaller than a 16 (even 12 in some cases) oz tank. Some weight redistribution of the radio may be needed due to the additional “nose” weight brought about by the motor/ESC/LiPo combo which weight more than an engine/tank and fuel. Wisely locating servos and the radio pack usually solves this problem including the possibility of installing twin elevator servos in the tail boom. Sometimes the radio battery also needs to sit behind the wing TE under a hatch much in the same way that the tail servos are located in the MK Skymaster.
A little creative former redesign and lite ply floor additions in the canopy area can produce a removable assembly for access to the LiPo located on a tray with the motors ESC just aft of the FW which can be moved forward a fair amount given the requirements of 50 mm can outrunner.
Also, Mike Seale scratch built both a BA as well as an Atlas using the same electric retracts and electric power systems. Here are the build logs and an excellent reference:
https://www.rcgroups.com/forums/show...-pre-build-log
https://www.rcgroups.com/forums/show...?2542547-Atlas
David
A little creative former redesign and lite ply floor additions in the canopy area can produce a removable assembly for access to the LiPo located on a tray with the motors ESC just aft of the FW which can be moved forward a fair amount given the requirements of 50 mm can outrunner.
Also, Mike Seale scratch built both a BA as well as an Atlas using the same electric retracts and electric power systems. Here are the build logs and an excellent reference:
https://www.rcgroups.com/forums/show...-pre-build-log
https://www.rcgroups.com/forums/show...?2542547-Atlas
David
Thank you for your valuable and timely reply. Earlier today, a club mate (a very experienced builder) and I were discussing today how to make things fit and how we would need to modify the internal structure and your reply could not have come at a better time. I will write to Mr. Seale and ask if he could post some photos of his motor, ESC, and battery bay areas and see if he has additional detailed info he could share.
We were thinking of increasing the size of the plane by 10% , a scratch build, that would provide more space, but it appears with Mike Seale's success that will not be necessary.
Again, thank you.
Francois
#1396
#1398
Hi Mike,
I started my blue angel project 4 weeks ago with a kit from HangarOne / NZ. The KATO plan is identical to your blue angel project from 2006 (RCU-Forum). The CG of 180mm given in my and your plan irritates me. The results of various pc programs for the CG calculation also give me very strange results for that wing profile. I also checked the CG with plans from various manufacturers. The model data were always identical (span 1650 mm, weight 3.5 kg, engine 10 cc, etc.). In all these other plans is the CG about 135mm. :-((
I have no explanation for that. I would be very grateful if you could give me the CG of your Blue Angel.
Mayby one of the forum participants can me help either.
Many Thanks.
Greetings from Germany.
tom
I started my blue angel project 4 weeks ago with a kit from HangarOne / NZ. The KATO plan is identical to your blue angel project from 2006 (RCU-Forum). The CG of 180mm given in my and your plan irritates me. The results of various pc programs for the CG calculation also give me very strange results for that wing profile. I also checked the CG with plans from various manufacturers. The model data were always identical (span 1650 mm, weight 3.5 kg, engine 10 cc, etc.). In all these other plans is the CG about 135mm. :-((
I have no explanation for that. I would be very grateful if you could give me the CG of your Blue Angel.
Mayby one of the forum participants can me help either.
Many Thanks.
Greetings from Germany.
tom
#1399
My Feedback: (3)
Join Date: Apr 2008
Location: Montreal,
QC, CANADA
Posts: 5,200
Likes: 0
Received 5 Likes
on
5 Posts
It would be interesting to know what range of MAC percentage that CG range represents.
keeping in mind of course that the BA has swept wing so the CG is likely much farther back than “gut feeling” would normally tell us.
I’m sure Mike will have the insight.
David
keeping in mind of course that the BA has swept wing so the CG is likely much farther back than “gut feeling” would normally tell us.
I’m sure Mike will have the insight.
David
#1400
My Feedback: (7)
Join Date: Sep 2002
Location: Kissimmee,
FL
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Mine flies good with the CG just in front of the main gear. As I recall it was about 175mm. For me, an old guy, fly's great! No nasty wing tip stuff when landing. And yes I use Spring Air retracts with Rossi power.
Jon
Jon