ESC for Brushed Motor---Suggestions?
12-17-2013, 01:55 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Lakeland, FL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ESC for Brushed Motor---Suggestions?
I'm trying to find an ESC to work with a DC 12v., 48amp, brushed trolling motor, which I've installed in a large scale scratch built tug boat. I'm using a 2.4 ghz radio/receiver. The battery power is provided by a 12v. car battery and I have a power distribution panel stepping down power to various levels. Any advice or suggestions where to look for a compatible ESC would be appreciated.
DJ
DJ
12-24-2013, 07:22 PM
#2
My Feedback: (6)
Don't know if this will do the job but check out this company:AstroFlight, Welcome to the AstroFlight online Store
Then go to electronics section. Bob Boucher, the owner of Astro Flight has a couple marine controllers. Also you need to have some idea how much current the motor/battery/ prop combo is going to draw.
Good luck with your build.
Then go to electronics section. Bob Boucher, the owner of Astro Flight has a couple marine controllers. Also you need to have some idea how much current the motor/battery/ prop combo is going to draw.
Good luck with your build.
