Futaba buddy box cord pin-outs
#1
Futaba buddy box cord pin-outs
I need to know the pin outs for making a Futaba buddy box cord. I need to go from the round Futaba to the Square Futaba connectors. I have the proper plugs for both ends, but I need to know the pin-outs for each plug so I can properly build a buddy box cord.
thanks in advance for any help with this.
thanks in advance for any help with this.
#4
My Feedback: (2)
Join Date: Jul 2002
Location: Hawthorne, CA
Posts: 5,839
Likes: 0
Received 0 Likes
on
0 Posts
RE: Futaba buddy box cord pin-outs
According to http://www.fly.faa.gov/flyfaa/scmap.jsp
Delays by Destination:
Due to WEATHER, LO CIGS, departure traffic destined to Chicago OHare International Airport, Chicago, IL (ORD) is currently experiencing delays averaging 1 hour and 39 minutes.
General Departure Delays: Traffic is experiencing gate hold and taxi delays lasting 15 minutes or less.
General Arrival Delays: Arrival traffic is experiencing airborne delays of 15 minutes or less.
Isn't Google great?
Delays by Destination:
Due to WEATHER, LO CIGS, departure traffic destined to Chicago OHare International Airport, Chicago, IL (ORD) is currently experiencing delays averaging 1 hour and 39 minutes.
General Departure Delays: Traffic is experiencing gate hold and taxi delays lasting 15 minutes or less.
General Arrival Delays: Arrival traffic is experiencing airborne delays of 15 minutes or less.
Isn't Google great?
#5
Senior Member
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove,
GA
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
RE: Futaba buddy box cord pin-outs
If you have a 9C or a Futaba square plug, then check out this:
http://www.geistware.com/rcmodeling/articles/9c_dsc.htm
http://www.geistware.com/rcmodeling/articles/9c_dsc.htm