RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   The Clubhouse (https://www.rcuniverse.com/forum/clubhouse-190/)
-   -   I have a OS61 FS & OS 60 SR I need.... (https://www.rcuniverse.com/forum/clubhouse-190/11113434-i-have-os61-fs-os-60-sr-i-need.html)

countilaw 06-10-2012 11:56 AM

I have a OS61 FS & OS 60 SR I need....
 
mufflers. What mufflers interchange with these two engines?

Frank

vpresley 06-10-2012 02:11 PM

RE: I have a OS61 FS & OS 60 SR I need....
 
hi

The older ASP 61 mufflers will fit. Check Ebay I see them for sale there quite a bit.


Vince

landeck 06-11-2012 05:03 AM

RE: I have a OS61 FS & OS 60 SR I need....
 
Do you mean the OS 61 SF instead of OS 61 FS? If so the OS 61 FX mufflers will fit. Also the TT 61 PRO muffler and the current ASP 61 should fit.

Bruce

vpresley 06-11-2012 06:15 AM

RE: I have a OS61 FS & OS 60 SR I need....
 
Hi

No he is talking about the 60 and 61 FSR Mufflers.



Vince

landeck 06-11-2012 08:44 AM

RE: I have a OS61 FS & OS 60 SR I need....
 
Vince, in that case the Fox 61/74 Eagle IV tilt up/down mufflers will fit if the mounting holes are drilled out for the OS metric bolts.

Bruce

JollyPopper 06-11-2012 09:07 AM

RE: I have a OS61 FS & OS 60 SR I need....
 
Those things have a really weird bolt pattern. I believe, if I remember correctly, it is 34mm between bolt holes while the SR and FX are 42mm as are a good many other brands. The only muffler I know that will fit is the OS 744 muffler. But now let me confuse you even more. OS makes two versions of the OS 744, one with the 34mm pattern and the other with the 42mm pattern. So if you find one online, make sure it is the correct pattern. SlimLine also makes a Pitts style muffler with this 34mm pattern but I have forgotten the part number for it.

I just found the SlimLine number. It is 3213. Good luck. These things are scarce as hen's teeth.

countilaw 06-11-2012 10:57 PM

RE: I have a OS61 FS & OS 60 SR I need....
 
It's  a     61  SF     Sorry guys,     My mistake.  

Frank

JollyPopper 06-12-2012 09:50 AM

RE: I have a OS61 FS & OS 60 SR I need....
 
OK, that's a 42mm bolt pattern. There are thousands of them out there. Now you need to determine how it bolts to the engine. Are the threads in the engine case or in the muffler? Do the bolts go through the muffler and thread into the engine case or do they go through the case and thread into the muffler?

countilaw 06-13-2012 05:39 AM

RE: I have a OS61 FS & OS 60 SR I need....
 
These engine are most commonly referred to as "bolt through". The bolt threads are in the mufflers.

Frank


All times are GMT -8. The time now is 12:16 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.