c.a. removal from monokote..
 

when i install c.a. hinges i get a white chalky substance on the monokote that doesnt seem to want to come off. any tips on how to remove it? thanks

c.a. removal from monokote..
 

Acetone. It won't hurt the monokote

c.a. removal from monokote..
 

CA remover from any LHS. If they buy the generic bottles and stick their own label on it, the top is GREEN. Let it soak in then wipe off with a paper towel lightly wetted down.

c.a. removal from monokote..
 

cool, thanks a lot guys

c.a. removal from monokote..
 

ca remover is acetone most covering isnt bothered by it ....put some on a paper towel and rub lightly the n run with dry secction.
just keep it away from ca u want intact! if u want to disolve ca on a balsa joint apply a couple of drops wait 10 min do it again and it turns to rubber.