How to extend length of CF rods...
#1
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
How to extend length of CF rods...
Does anyone knows how to enlarge the length of CF rods to be used as push rods. I need 4.5 feet long rod but most i found are 3.5 feet in length....
Do you guys do the joint internally by use of metal rod to join 2 CF rods together or use external coupling method with sleeve over main rod to join them together....
#3
Thread Starter
Join Date: Aug 2005
Location: Mississauga,
ON, CANADA
Posts: 4,196
Likes: 0
Received 1 Like
on
1 Post
RE: How to extend length of CF rods...
ORIGINAL: Magne
An external (carbon fibre tube) sleeve will be much stiffer than an internal one.
Magne
An external (carbon fibre tube) sleeve will be much stiffer than an internal one.
Magne
Thanks Magne, i shall do it this way then...
#4
Senior Member
Join Date: Jan 2011
Location: Cody,
WY
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
RE: How to extend length of CF rods...
If your sleeve is made from uni-direction material or pultruded then you want to wrap the tube with some fiber to prevent it from splitting.
Adam
Adam
#5
Member
Join Date: Dec 2009
Location: , QC,
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: How to extend length of CF rods...