SCALECRAFT/TURBONUT 90mmMiG 21
#1
Thread Starter
My Feedback: (13)
SCALECRAFT/TURBONUT 90mmMiG 21
We had the good fortune of getting a decent old composite MiG 21 fuse that can expedite the fabrication of one of our next wanted edfs.
It was made to fly with a prop. But not when we're done with it. Fuse is 54.25" from intake to tail cone.
This should come together much faster since it is not as complex a fuse as the F-104 and the fuse is already done. It will look more like a "MF" version than this "P" version
Pics did not load. See EDF jets section on RCG.
Steve
It was made to fly with a prop. But not when we're done with it. Fuse is 54.25" from intake to tail cone.
This should come together much faster since it is not as complex a fuse as the F-104 and the fuse is already done. It will look more like a "MF" version than this "P" version
Pics did not load. See EDF jets section on RCG.
Steve
#5
Thread Starter
My Feedback: (13)
RE: SCALECRAFT/TURBONUT 90mmMiG 21
The thing I like about it is that the fuse is very heavy. It is a perfect plug to convert to EDF.
. A few things are inaccurate that I will change, but its a pretty good rendition of the MiG.
pics still don't load. Server error pops up.
Steve
. A few things are inaccurate that I will change, but its a pretty good rendition of the MiG.
pics still don't load. Server error pops up.
Steve