Fiberglass resin with microfibers to bond
#1
Senior Member
Thread Starter
Join Date: Feb 2007
Location: sparta, NJ
Posts: 1,356
Likes: 0
Received 0 Likes
on
0 Posts
Fiberglass resin with microfibers to bond
I need to bond a deck to hull. I think fiberglass resin will set up too fast and not give me enough time to work. Is there another product that will allow me the time and still allow for a good bond for fiberglass deck to fiberglass hull? The deck has to be positioned after gluing with fiberglass resin and taped. This is a 36 inch deck with an overhang that needs spacing and taping. I have heard West Systems 105 epoxy and 205 hardener may work better. Need input. Thanks Ron
#3
Senior Member
Thread Starter
Join Date: Feb 2007
Location: sparta, NJ
Posts: 1,356
Likes: 0
Received 0 Likes
on
0 Posts
#5
Senior Member
Thread Starter
Join Date: Feb 2007
Location: sparta, NJ
Posts: 1,356
Likes: 0
Received 0 Likes
on
0 Posts