Unidirectional carbon fiber laminate sheet (cloth) Cheap!!
11-04-2004, 02:55 PM
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Jan 2002
Location: Newport Coast,
CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Unidirectional carbon fiber laminate sheet (cloth) Cheap!!
Unidirectional laminate sheet (cloth) of carbon fiber 36" x 36 x .005thk (other lengths available).
$20 shipped Priority Mail 2 sheets for $35 shipped
Trade for your Raptor 30 50 60, JR heli, Futaba CHP - CAP radio Electric heli or brushless stuff! Lets talk!!
This unidirectional carbon fiber laminate is used to add stiffness to almost any material (i.e. fiberglass, foam, and balsawood).
This unidirectional carbon fiber is ideally suited for reinforcing lightweight structures such as free flight, electric aircraft, built up or foam wing gliders, helicopter canopies, jets and pylon racing aircraft that require greater stiffness and strength.
2 layers could be used where maximum strength in one direction (or more) is desired as in quarter or giant scale aircraft and formula one racers.
The laminates can also be used for a variety of other applications such as rocket fuselages aircraft, surfboards, boat centerboards and guitar necks.
This sheet can easily be stripped into smaller widths by cutting lengthwise with a razor knife and a straight edge.
Multi layers of the laminate rotated at different angles (45, 90 degrees) are ideally suited for reinforcing the sides of fuselages and especially bulkheads.
Slow set CA or 5 minute epoxy adhesive can be used to bond the laminates.
Paypal ready!!
I have no .007 left. Sorry.
email me at [email protected]
$20 shipped Priority Mail 2 sheets for $35 shipped
Trade for your Raptor 30 50 60, JR heli, Futaba CHP - CAP radio Electric heli or brushless stuff! Lets talk!!
This unidirectional carbon fiber laminate is used to add stiffness to almost any material (i.e. fiberglass, foam, and balsawood).
This unidirectional carbon fiber is ideally suited for reinforcing lightweight structures such as free flight, electric aircraft, built up or foam wing gliders, helicopter canopies, jets and pylon racing aircraft that require greater stiffness and strength.
2 layers could be used where maximum strength in one direction (or more) is desired as in quarter or giant scale aircraft and formula one racers.
The laminates can also be used for a variety of other applications such as rocket fuselages aircraft, surfboards, boat centerboards and guitar necks.
This sheet can easily be stripped into smaller widths by cutting lengthwise with a razor knife and a straight edge.
Multi layers of the laminate rotated at different angles (45, 90 degrees) are ideally suited for reinforcing the sides of fuselages and especially bulkheads.
Slow set CA or 5 minute epoxy adhesive can be used to bond the laminates.
Paypal ready!!
I have no .007 left. Sorry.
email me at [email protected]
