Carbon Fiber Wing Joint
#1
Member
Thread Starter
Join Date: May 2002
Location: Wauchula, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Carbon Fiber Wing Joint
I need to reinforce the wing joints on an overpowered biplane. I was wondering if carbon fiber cloth would be a better choice than fiberglass. If so, what kind of carbon fiber, what weave, size, and kind of resin. Thanks for any help.
#2
Senior Member
Join Date: Jun 2002
Location: Baltimore, MD
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Carbon Fiber Wing Joint
For general reinforcing I use a 5.9oz cloth with a plain weave. You could probably get away with a 2-3oz cloth for a wing joint. www.cstsales.com sells a 2.5oz bias cut CF cloth that would be perfect to reinforce a wing joint. For epoxy I like west system epoxy 205 resin with 206 hardner. Gives you plenty of time to wet out the CF cloth.