Cheapest source for carbon tape-strenghtening profile fuse.
#1
Thread Starter
My Feedback: (21)
Cheapest source for carbon tape-strenghtening profile fuse.
was thinking about using carbon tape somehow to strengthen the backhalf of fuse.
i've already put a few carbon rods in there. the fuse is 1.25" pink foam with balsa over it. the front is doubled with 1/"8 ply.
the problem is, when i grab the ends of the stab, there is more twist than i like.
so i was thinking of carbon tape in a truss type layout, and then covering with another layer of balsa, running the other direction.
any suggestions?
i've already put a few carbon rods in there. the fuse is 1.25" pink foam with balsa over it. the front is doubled with 1/"8 ply.
the problem is, when i grab the ends of the stab, there is more twist than i like.
so i was thinking of carbon tape in a truss type layout, and then covering with another layer of balsa, running the other direction.
any suggestions?
#4
RE: Cheapest source for carbon tape-strenghtening profile fuse.
I've got 12k carbon tow. It's raw carbon fiber. Little harder to work with, but I could sell you a length for next to nuthin.
Lemme kow if I can help.
Brian
Lemme kow if I can help.
Brian