Needed 1/2" OD tube
12-16-2002, 01:42 PM
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2001
Location: Bedford, UK
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Needed 1/2" OD tube
Can any of you guys help me source 1/2" Outside Diameter carbon Tube? I need to replace my tail tubes and the two online catalogs only have 1/2" Inside Diam.
BTW this is for a Hangar 9 1/3 scale Cap, the aluminum tubes bent.
Thanks,
Chris
BTW this is for a Hangar 9 1/3 scale Cap, the aluminum tubes bent.
Thanks,
Chris
12-17-2002, 12:38 AM
#2
My Feedback: (40)
Join Date: Dec 2001
Location: Waynetown,
IN
Posts: 2,476
Likes: 0
Received 0 Likes
on
0 Posts
Needed 1/2" OD tube
I think CST Sales has them
www.CSTSALES.com
I just checked---------.500 OD $8.85 a foot and they sell it in a 4 foot length. If this is more than you need, I may be interested in buying some of it.
www.CSTSALES.com
I just checked---------.500 OD $8.85 a foot and they sell it in a 4 foot length. If this is more than you need, I may be interested in buying some of it.
12-17-2002, 12:51 AM
#3
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2001
Location: Bedford, UK
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Needed 1/2" OD tube
CST sales shows the unidirectional hollow carbon rod. Would this be sufficient for stab tubes or do I need the woven tubes like my wing tubes? Keeping in mind that the aluminum tubes that came with the kit bent during "pop-ups" and the like. Pretty funny to have my Cap sitting there with extra dihedral in the wing and anhedral in the tail.
Thanks for the help,
Chris
Thanks for the help,
Chris
