stick08

go to fivestardistribution.com and try their Flexy cyano ref CA005 (black) or their clear one ref CA012, i repare my Vigenn ( crashed dut to failure of one elvevon's servo) and this glue did the job for about 80% the rest i used polyester resin ( less expensive than epoxy). the flexy cyano glue two part of fiberglass or any plastic in about 5 to 10 second ( or much more if you put a lot) than you dont have to hold long as 5 minutes asking your self is it glued ? and sometime desesperated because its never work . the price is good 2.5£ for black flexy or 2.99£ for flexy clear they ship low cost to all the world under their responsability . at my field we are many that use this glue on our jets and we buy only this one. (dont think we buy every day as we dont crash every day....only on week end ! ). they accept order by fax dial int'l 44 (0)151 733 71 82 or by email ( no attachement please) at [email protected] attn Ann ( they come to France every year in June at a big meeting "La ferte Alais" famous in Europe. be sure i'm not working for them but this product is so good for the Jet in fiberglass/wood/fiberglass, and you must know this glue exist.

good gluing/flying