RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Composites Fabrication And Repair (http://www.rcuniverse.com/forum/composites-fabrication-repair-97/)
-   -   1/2oz Carbon fiber mat (http://www.rcuniverse.com/forum/composites-fabrication-repair-97/2430001-1-2oz-carbon-fiber-mat.html)

HORNETONE 12-13-2004 04:37 PM

1/2oz Carbon fiber mat
 
Hi everyone ........

Would like to know if anyone out there have ever used or have any experience with the 1/2oz carbon fiber mat or a little heavier than that .What are the advantage and disadvantage of it .Where can I buy them from ...
Thanks in advance ,
Sonny !

kamakasi 12-17-2004 01:43 PM

RE: 1/2oz Carbon fiber mat
 
Sonny,
I'm using some right now. I got it from cst, asp also has it. From what I've found it comes in two weights .5oz. and .2 oz. per yard the .5oz. stuff seems to be about .005!QUOT! thick (kind of hard to measure because of compression. I'm primarily using it sandwiched between parts to add stiffness. It's amazing what the difference is. I tried using it like glass to reinforce an external seam, it worked o.k. but the stuff fuzzes like you would not believe. I am not using bagging so that might help the final appearance.

HORNETONE 12-17-2004 09:07 PM

RE: 1/2oz Carbon fiber mat
 
Hi Kamakasi ,

Thanks a lot for your inputs ... As I intended to use it as a reinforcement between balsa skin and foam wings on a jet that' has protential convertion to turbine powered ...
Best regards ,
Sonny !

BTW : Have a nice holiday !


All times are GMT -8. The time now is 02:08 AM.