Need some help here guys!
12-20-2003, 01:40 AM
#1
Senior Member
Thread Starter
My Feedback: (5)
Join Date: Dec 2001
Location: Everett, WA
Posts: 6,988
Likes: 0
Received 0 Likes
on
0 Posts
Need some help here guys!
I have a torpedo .35 that my sister bought me way back in '62 or so and it's time I cleaned it up as it has been a drawer for a very long time, sentimental reasons really. Now the problem in the engine is missing the needle valve and spray bar nothing but a hole in the venturi. I sure hope someone can help me out here as I really would like to get it running again. Thanks guys.
12-20-2003, 02:38 AM
#2
Senior Member
My Feedback: (3)
Join Date: Nov 2002
Location: Mary Esther, Florida, FL
Posts: 20,205
Likes: 0
Received 14 Likes
on
13 Posts
RE: Need some help here guys!
+Art:
That old K&B will use just about any spraybar and needle you can find. Easiest if your LHS can't supply is Brodak's, here's a link to his NVA:
http://www.brodak.com/shop_productde...maincatagory=1
Bill.
That old K&B will use just about any spraybar and needle you can find. Easiest if your LHS can't supply is Brodak's, here's a link to his NVA:
http://www.brodak.com/shop_productde...maincatagory=1
Bill.
12-20-2003, 04:44 PM
#3
My Feedback: (10)
RE: Need some help here guys!
GrnBrt,
I can fix you up with a NV assembly for that engine, an original K&B spraybar with one of my torp GH repro needles. No charge, email me...
[email protected]
Andrew J. Coholic
ajcoholic
I can fix you up with a NV assembly for that engine, an original K&B spraybar with one of my torp GH repro needles. No charge, email me...
[email protected]
Andrew J. Coholic
ajcoholic
