Landing gear for Ultrasport 60
#1
Thread Starter
Join Date: Oct 2004
Location: Wyoming,
MN
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Landing gear for Ultrasport 60
I recently acquired a very used Ultrasport 60 of which I am in the process of rebuilding. The landing gear that came with it was a dural gear screwed onto the nose in front of the wing. I want to bring the airplane back to its original appearance but I need the correct landing gear that came with the kit.
Does anyone have a spare set that I could buy?
Does anyone have a spare set that I could buy?
#2
RE: Landing gear for Ultrasport 60
You can contact Great Planes customer service and see if the parts you want are available:
WBNT149 5/32" WIRE NOSE GEAR 1 3.68
WBNT150 5/32" WIRE MAIN GEAR 2 2.45
You can also download the instruction manual for the plane and also order a set of plans from
them: http://www.greatplanes.com/parts/index.html
Good luck with your refurb, a really great flying aircraft.
Bill D.
WBNT149 5/32" WIRE NOSE GEAR 1 3.68
WBNT150 5/32" WIRE MAIN GEAR 2 2.45
You can also download the instruction manual for the plane and also order a set of plans from
them: http://www.greatplanes.com/parts/index.html
Good luck with your refurb, a really great flying aircraft.
Bill D.