mikes68charger

My Feedback: (34)

Im having a hard time posing so Test test Test

mikes68charger

My Feedback: (34)

This is a CARF Eurosport that the Jet Cat P160(Titan) locked up on me right after take off.

mikes68charger

My Feedback: (34)

Lets see of this works, Lost panel lines, so had to rebuild with primer, I also lost the peace of fiberglass for the wing tip, so I Sprayed can foam in to the cavity, then, fiberglassed, and worked.

mikes68charger

My Feedback: (34)

This is an Aviation Diamond I picked up at FL Jets in 2017

mikes68charger

My Feedback: (34)

The leading edge above, was fixed by putting a round carbonfiber rod from the two good areas, to keep everything straight and strong, then filled in with West Cost Epoxy with fiber power

mikes68charger

My Feedback: (34)

Once Striped of its original paint, you can see more of the damage from hitting the tree, a lot of areas of the jell coat were damaged.

This Striper was amazing and did not stink.

Also I could not afford the $1k for replacement retracts, so I used what I already had, and made a sweet bracket to use a regular nose wheel, I figured I would need the nose weight anyways due to the repairs

mikes68charger

My Feedback: (34)

The first color is an 2K urethane single stage silver melt, very nice in person. Then added a custom metallic red, and metallic black

mikes68charger

My Feedback: (34)

The colors look great in person

mikes68charger

My Feedback: (34)

Did not like the plan looking exhaust, I could of painted it black like most of them are, but I added some chrome tape, then little flat black air brush, then still cleared it to lock it all in .

beachsideflyer

Nice resurrection, way to hang in there!

jcterrettaz

My Feedback: (1)

very impressive

jescardin

My Feedback: (1)

Mike you are an artist rebuilding jet planes!

Sure couldnīt be better!

Best Regards.