Tail Broken Off
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Location: Salisbury,
MD,
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Tail Broken Off
The tail has been broken completely off my Hanger 9 Pizzaz just in front of the horizontal stab. The break is 'relatively' clean. Some splintering of the balsa side sheeting on the rear of the fuselage. The rest of the plane looks OK I love flying this and would like to try a repair.
I've never made major repairs before but I have built from a kit and feel comfortable doing this. I plan to get some personal help from some folks at my club but have a simple question first.
Is it possible to reattach a tail section to a plane and have it fly right again? Or is it simply not done because it can't be done right?
Thanks for the help,
Bski
I've never made major repairs before but I have built from a kit and feel comfortable doing this. I plan to get some personal help from some folks at my club but have a simple question first.
Is it possible to reattach a tail section to a plane and have it fly right again? Or is it simply not done because it can't be done right?
Thanks for the help,
Bski