which mount for BSE 50 in Patriot
#1
Thread Starter
which mount for BSE 50 in Patriot
Bob,
i want to purchase the mount for this project, but don't see any hard dimensions for either the backplate mount or the beam mount on Jett's site.
can you help me out with this?
the beam mount is my preferred way for RC planes and with that i can make it an easier install for the RNV too i assume.
just not sure if it'll fit in there.
with the RPM this engine is capable of, i have serious doubts as to using the GP mount that comes in the kits.
thx
-mike
i want to purchase the mount for this project, but don't see any hard dimensions for either the backplate mount or the beam mount on Jett's site.
can you help me out with this?
the beam mount is my preferred way for RC planes and with that i can make it an easier install for the RNV too i assume.
just not sure if it'll fit in there.
with the RPM this engine is capable of, i have serious doubts as to using the GP mount that comes in the kits.
thx
-mike
#3
My Feedback: (19)
Join Date: Apr 2002
Location: Cleveland,
OH
Posts: 5,576
Likes: 0
Received 0 Likes
on
0 Posts
RE: which mount for BSE 50 in Patriot
Glad you got it...
The stock mounts work ok. I replaced the mount on mine with an old QM40 mount, simply because I had it sitting around, and I wanted to slide the engine aft slightly.
Bob
The stock mounts work ok. I replaced the mount on mine with an old QM40 mount, simply because I had it sitting around, and I wanted to slide the engine aft slightly.
Bob