RCU Forums - Which Jett?

RCU Forums (https://www.rcuniverse.com/forum/)

- Dub Jett Engines Support (https://www.rcuniverse.com/forum/dub-jett-engines-support-115/)

- - Which Jett? (https://www.rcuniverse.com/forum/dub-jett-engines-support-115/8483813-jett.html)

Broken Wings

02-16-2009 05:57 PM

Which Jett?

I've got a Big Stick 60 and I want to run a Jett on the nose.

Which one would you recommend?

bob27s

02-16-2009 06:13 PM

RE: Which Jett?

Jett 90L

regular version is good. Same size as a typical .61 engine.

12x6 prop.

Be sure you glue the tail on well :)

Bob

Broken Wings

02-16-2009 08:46 PM

RE: Which Jett?

Will the 1.00 spin a 13x6...:D

bob27s

02-16-2009 09:14 PM

RE: Which Jett?

It can.

The BSE-100L runs about the same rpm as the 90L - same muffler, just uses a little more prop.

You want to target around 13,500 minimum ground peak rpm. Hitting 14K or better ground peak is prefered.

Broken Wings

02-27-2009 06:01 PM

RE: Which Jett?

1 Attachment(s)

Quote:

ORIGINAL: bob27s

Jett 90L

regular version is good. Same size as a typical .61 engine.

12x6 prop.

Be sure you glue the tail on well :)

Bob

I took your advice and bought the 90L...:D

bob27s

03-01-2009 12:16 PM

RE: Which Jett?

Great!!

You will enjoy it.

Take the time to put the initial bench run time on it. I prefer to use an 11x6 or 11x7 prop on the 90L engines for initial run-in.

Bob

All times are GMT -8. The time now is 09:03 AM.