RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Dub Jett Engines Support (http://www.rcuniverse.com/forum/dub-jett-engines-support-115/)
-   -   Carb mounted needle valve 90L (http://www.rcuniverse.com/forum/dub-jett-engines-support-115/8598465-carb-mounted-needle-valve-90l.html)

Broken Wings 03-20-2009 05:44 PM

Carb mounted needle valve 90L
Bob, can you still purchase the 90 size carburetors without remote needle valves? It's not that I don't like the remote but my engine is mounted horz. and it would make things easier for me.

Also does Dubb make a FOD/Airfilter for grass/Florida Sand fields?:D

I purchased the rear radial mount and noticed that it doesn't have the cut-away for the piston skirt like the normal backplate. I removed the glow plug and carefully turned it through and there is no interference.

bob27s 03-20-2009 07:38 PM

RE: Carb mounted needle valve 90L

Dub stopped making the carb mounted needles entirely about 8 years ago. Not available.

But remember, the universal remote can be mounted anywhere, and any position that works best for you. Remove it from the engine and mount it on the airframe. or you can orient it to another position mounted on the engine.

Dub does not have an air filter made for the engine, but I have in the past just used a piece of nylon stocking and a "Braces rubber band" to cover the carb. No really performance change.


All times are GMT -8. The time now is 09:16 AM.

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.