Switching from Ni-CD to Li-Po.
#1
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Mercer County,
NJ
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Switching from Ni-CD to Li-Po.
I have read most of the posts here in this section, and would just like some advice regarding my setup.
I'm building a GWS Pt-17, and the setup came with a 7.2 Volt 600 mAh Ni-Cd battery.
I bought 2 Thunder Power Li-po 7.4 Volt 2100 mAh batteries. Will I run into any problems with the .2 extra voltage ?
Thank you for any advice.[sm=thumbup.gif]
I'm building a GWS Pt-17, and the setup came with a 7.2 Volt 600 mAh Ni-Cd battery.
I bought 2 Thunder Power Li-po 7.4 Volt 2100 mAh batteries. Will I run into any problems with the .2 extra voltage ?
Thank you for any advice.[sm=thumbup.gif]