RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   E-Flight Power Sources (https://www.rcuniverse.com/forum/e-flight-power-sources-126/)
-   -   power 25 glow comparison (https://www.rcuniverse.com/forum/e-flight-power-sources-126/11594917-power-25-glow-comparison.html)

acdii 02-17-2014 01:08 PM

power 25 glow comparison
 
What would be the glow equivalent to the Eflite power 25's? I have a pair laying around and want to build something to put them in, so to go down the right path I need to know what size 2 stroke plane they would work on. I currently have a Hanger 9 Twin Otter running a pair of these, so have some idea how big a twin it can pull, but knowing the glow equal would be even better.

Dr Kiwi 02-20-2014 05:35 PM

This is a reversal of the usual comparison... they are called Power 25 because they are considered the equivalent of a .25 glow motor!... for, I assume, a ".25-size" aircraft (whatever that might be)

acdii 02-20-2014 07:07 PM


Originally Posted by Dr Kiwi (Post 11741829)
This is a reversal of the usual comparison... they are called Power 25 because they are considered the equivalent of a .25 glow motor!... for, I assume, a ".25-size" aircraft (whatever that might be)

Is that .25 2 stroke? Reason I ask is because one of these came out of a T-34 that needed a .52 4 stroke to fly it.

chuckk2 02-20-2014 11:28 PM

Most of the E-Flite motors are intended to run at a lower RPM than the average 2 cycle glow engine.
The 25 is somewhat of an exception due to three versions with different KV ratings.
If I remember correctly, the low KV version 25 is a 600W motor. That's about .8HP

aeajr 02-28-2014 12:36 PM


Originally Posted by acdii (Post 11741896)
Is that .25 2 stroke? Reason I ask is because one of these came out of a T-34 that needed a .52 4 stroke to fly it.

Yes, 2 stroke

acdii 02-28-2014 06:22 PM

OK I have an idea what size twin warbird to build. Thanks.


All times are GMT -8. The time now is 02:46 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.