XHeli CNC Upgrades - how good are they????
08-08-2010, 01:48 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Benin City, Edo StateEdu State, NIGERIA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
XHeli CNC Upgrades - how good are they????
http://www.xheli.com/bl400codealh.html
...... at the link above, anybody has experience with them??????
...... at the link above, anybody has experience with them??????
08-08-2010, 08:46 PM
#2
Junior Member
Join Date: Jul 2010
Location: louisburg, NC
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
RE: XHeli CNC Upgrades - how good are they????
this website is a fake because i was gonna order a exceed rc from them but the website had such a bad rep that the bank had blocked my card from going through. thank goodness i didnt get shorted out of $400 dollars you know what i mean. anyways hope this saves you money to.
John
09-09-2010, 10:41 PM
#3
Junior Member
Join Date: Sep 2009
Location: Alliston,
ON, CANADA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: XHeli CNC Upgrades - how good are they????
I bought this one
http://www.xheli.com/ebl400cnfiup.html
turnedout to be a great deal, 2 sets of carbon fibre blades, CNC rotor head assembly(need to cut about 3mm off theshaft for it to fit the Blade 400) CNC tail assembly (haven't needed toinstalle it yet). Received it within a little more than a week and i am in Canada.
http://www.xheli.com/ebl400cnfiup.html
turnedout to be a great deal, 2 sets of carbon fibre blades, CNC rotor head assembly(need to cut about 3mm off theshaft for it to fit the Blade 400) CNC tail assembly (haven't needed toinstalle it yet). Received it within a little more than a week and i am in Canada.
09-10-2010, 12:32 AM
#4
My Feedback: (10)
Join Date: Jun 2004
Location: Orlando, FL
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
RE: XHeli CNC Upgrades - how good are they????
Xheli isn't a fake website and they do provide decent CNC parts for the replacement of plastic head and tail parts.
I have purchased CNC replacement parts for an older 450, as well as CF frame parts from them. They also have a dedicated forum here on RCU so you have the chance to speak to the manager/representative directly and ask any questions you may have.
A plus is they are located in California and so shipping is fast and inexpensive, verses the overseas Asian companies.
Mark
I have purchased CNC replacement parts for an older 450, as well as CF frame parts from them. They also have a dedicated forum here on RCU so you have the chance to speak to the manager/representative directly and ask any questions you may have.
A plus is they are located in California and so shipping is fast and inexpensive, verses the overseas Asian companies.
Mark
