Sentilon 100A HV (V4) esc
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: La Herradura Edo. de Mexico, 53920 MEXICO
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Sentilon 100A HV (V4) esc
Sentilon 100A HV (V4) esc
Is anybody using one, or tried one or know anybody who has?
Thanks in advance for any comments.
Is anybody using one, or tried one or know anybody who has?
Thanks in advance for any comments.
#3
Senior Member
Thread Starter
Join Date: Jan 2004
Location: La Herradura Edo. de Mexico, 53920 MEXICO
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
RE: Sentilon 100A HV (V4) esc
Gord.
Thanks for the note.
Does yours look like this, with the external capacitor pack?
Just interested, because it is somewhat different from spec on Hobby King and here was no mention of it
on the instruction sheet.
Once I got it programmed and the tx throttle points worked out it works fine. I will probably flight test it this week end.
This is an old Desire 60 pattern plane e-conversion: E-flite Power 90, 8s, 17x10 APC.
All up weight is about 7.5 lbs.
Thanks for the note.
Does yours look like this, with the external capacitor pack?
Just interested, because it is somewhat different from spec on Hobby King and here was no mention of it
on the instruction sheet.
Once I got it programmed and the tx throttle points worked out it works fine. I will probably flight test it this week end.
This is an old Desire 60 pattern plane e-conversion: E-flite Power 90, 8s, 17x10 APC.
All up weight is about 7.5 lbs.
#4
Senior Member
Join Date: Mar 2002
Location: Kingston,
ON, CANADA
Posts: 4,925
Likes: 0
Received 3 Likes
on
3 Posts
RE: Sentilon 100A HV (V4) esc
No, mine may be an earlier one. The little dewy on your + wire looks like something I made to stop the snapping arc when you plug it in. A buddy more knowledgible than I( that probably includes everybody) showed me how to make this device that goes across the + wire before installing the main power lead in order to charge the capacitors beforehand.