Walkera V450D03 Servos
08-10-2015, 05:31 PM
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jan 2009
Location: Chesapeake,
VA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Walkera V450D03 Servos
I just gained a Walkera V450D03,can someone suggest a set of servo that they KNOW will fit this NOT really that great a Heli?
of course I mean OTHER then the stock servos.................
Thanks.........
from Me.........
of course I mean OTHER then the stock servos.................
Thanks.........
from Me.........
08-10-2015, 07:25 PM
#2
Not sure of the correct size, but a guess would be 9 gram servos. Have you looked at the EXI 9gram digital's?
http://www.hobbypartz.com/9gexidimeges.html
Buzz.
http://www.hobbypartz.com/9gexidimeges.html
Buzz.
08-11-2015, 01:45 AM
#3
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jan 2009
Location: Chesapeake,
VA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
The servo has to be the right size to fit into a slot,unlike a normal servo instal where you put 2 screws thru the holes to hold the servo,the pitch servo goes in sideways and the screws hold in in place by the wide head of a screw .
