Trouble finding prop size
#1
Thread Starter
Join Date: Aug 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Trouble finding prop size
I'm using a Tacon Bigfoot 160 with a Turnigy Sentilon V4 100A 5-12s HV Bulletproof Speed Controller w/RPM Sensor
and 8 Cell battery on a 15 pound model whats the largest prop i can use
and 8 Cell battery on a 15 pound model whats the largest prop i can use
#2
I used this calc program.
http://ecalc.ch/motorcalc.php
I used an 8s battery 8000mah, 20x12 APC E prop and it calcs 76 amps, 344 ounces of thrust.
I figure about a 10% plus or minus to real world numbers. You would need a watt meter to keep from letting the magic smoke out.
Buzz.
http://ecalc.ch/motorcalc.php
I used an 8s battery 8000mah, 20x12 APC E prop and it calcs 76 amps, 344 ounces of thrust.
I figure about a 10% plus or minus to real world numbers. You would need a watt meter to keep from letting the magic smoke out.
Buzz.
#3
Senior Member
You can do some simple checks to answer your own question. What is the minimum ground clearance you need; this will determine the maximum diameter. Now you need to pick the pitch that will keep you within the maximum current ratings of your ESC and/or motor. That is where you need the watt meter so you can test with different amounts of pitch.