Micro boards with BL built in.
#1
Thread Starter
Join Date: Nov 2013
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Micro boards with BL built in.
Pictured are three units, one is working the other two are as well but the aileron outputs are connected to the throttle. I'm using a Turnigy 9x with FHSS module as recommended at the time I purchased the gear. Long story, but that was several years ago. Just getting round to making something fly with these.
I know engines,
electrics are still something of a struggle.
Pictured are, A Spektrum TX with a module that works just fine. It's the Turnigy that I'm struggling with. Both the "square" and the "long" bricks work, bind fine but both have the throttle stick driving the two aileron outputs. Turnigy offers four, mode stick arrangements, but none apply the aileron stick to the servo outputs. One gives rudder and elevator to the linears on the board, which is what you want. All four apply the socket outputs to the throttle stick. Hope that's clear.
Any help would be much appreciated.
I know engines,
Pictured are, A Spektrum TX with a module that works just fine. It's the Turnigy that I'm struggling with. Both the "square" and the "long" bricks work, bind fine but both have the throttle stick driving the two aileron outputs. Turnigy offers four, mode stick arrangements, but none apply the aileron stick to the servo outputs. One gives rudder and elevator to the linears on the board, which is what you want. All four apply the socket outputs to the throttle stick. Hope that's clear.
Any help would be much appreciated.