ImHooked

My Feedback: (1)

I have the Eflite AT6 with the power 25, 60 amp ESC. I am using the recomened JR micro servos and will be using my Futaba 7C transmitter. I am assuming that the Futaba R617FS is the proper receiver for this electric setup?? I am sorry if this sounds stupid, but this is my first electric job.

Thanks for your responses. (and patience!!)

Walt Thyng

My Feedback: (9)

Your power system has nothing to do with the type of receiver you use.
Walt

exeter_acres

My Feedback: (2)

correct...

is your radio 2.4ghz?

if yes, then that is a fine receiver

ImHooked

My Feedback: (1)

Great, thank you for the responses. I know that the receiver has nothing to do with the power setup, I was more referring to the micro servos working correctly with the R617FS. Sorry, I probably didn't ask the question right.

Thanks again.

Walt Thyng

My Feedback: (9)

Again, as long as the polarity is correct (and it now now an industry standard) neither the receiver nor the servos care about the other's identity.
Walt